Re: [RFC PATCH 3/7] drm/msm/dpu: Disable MDP vsync source selection on DPU 5.0.0 and above

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2.01.2023 11:18, Marijn Suijten wrote:
> On 2023-01-02 10:30:58, Konrad Dybcio wrote:
>>
>>
>> On 31.12.2022 22:52, Marijn Suijten wrote:
>>> On 2022-12-31 22:50:02, Marijn Suijten wrote:
>>>> Since hardware revision 5.0.0 the TE configuration moved out of the
>>>> PINGPONG block into the INTF block, including vsync source selection
>>>> that was previously part of MDP top.  Writing to the MDP_VSYNC_SEL
>>>> register has no effect anymore and is omitted downstream via the
>>>> DPU/SDE_MDP_VSYNC_SEL feature flag.  This flag is only added to INTF
>>>> blocks used by hardware prior to 5.0.0.
>>>>
>>>> The code that writes to these registers in the INTF block will follow in
>>>> subsequent patches.
>>>>
>>>> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
>>>> ---
>>>>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 33 ++++++++++--
>>>>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  1 +
>>>>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c    | 52 +++++++++++++------
>>>>  3 files changed, 66 insertions(+), 20 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>>> index 39d4b293710c..1cfe94494135 100644
>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>>> @@ -407,7 +407,7 @@ static const struct dpu_mdp_cfg msm8998_mdp[] = {
>>>>  	{
>>>>  	.name = "top_0", .id = MDP_TOP,
>>>>  	.base = 0x0, .len = 0x458,
>>>> -	.features = 0,
>>>> +	.features = BIT(DPU_MDP_VSYNC_SEL),
>>>>  	.highest_bank_bit = 0x2,
>>>>  	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
>>>>  			.reg_off = 0x2AC, .bit_off = 0},
>>>> @@ -436,7 +436,7 @@ static const struct dpu_mdp_cfg sdm845_mdp[] = {
>>>>  	{
>>>>  	.name = "top_0", .id = MDP_TOP,
>>>>  	.base = 0x0, .len = 0x45C,
>>>> -	.features = BIT(DPU_MDP_AUDIO_SELECT),
>>>> +	.features = BIT(DPU_MDP_AUDIO_SELECT) | BIT(DPU_MDP_VSYNC_SEL),
>>>>  	.highest_bank_bit = 0x2,
>>>>  	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
>>>>  			.reg_off = 0x2AC, .bit_off = 0},
>>>> @@ -512,6 +512,31 @@ static const struct dpu_mdp_cfg sm6115_mdp[] = {
>>>>  	},
>>>>  };
>>>>  
>>>> +static const struct dpu_mdp_cfg sdm8150_mdp[] = {
>>>
>>> Sometimes it is only possible to spot such things _after_ sending,
>>> probably the thing that makes us human :)
>>>
>>> sm8150_mdp*, not sdm.
>>>
>>> - Marijn
>>>
>>>> +	{
>>>> +	.name = "top_0", .id = MDP_TOP,
>>>> +	.base = 0x0, .len = 0x45C,
>>>> +	.features = BIT(DPU_MDP_AUDIO_SELECT),
>>>> +	.highest_bank_bit = 0x2,
>>>> +	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
>>>> +			.reg_off = 0x2AC, .bit_off = 0},
>> Keeping the hex values lowercase would be nice.
> 
> Ack, this was copied verbatim from sdm845_mdp but will cleanup as we go.
> Looks like this file has a mixed approach towards lower and uppercase,
> when does the normalization patch land?
Rob was against changing everything in one commit, as that would mess
with git blame, so we settled on preventing adding new uppercase hex
for now (outside of #defines ofc).

Konrad
> 
> - Marijn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux