[PATCH v2 01/17] arm64: dts: qcom: ipq6018: Pad addresses to 8 hex digits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
v1 -> v2:
- Remove stray duplicated usb node

 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 2ceae73a6069..6f12c1a8f90f 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -146,7 +146,7 @@ reserved-memory {
 		ranges;
 
 		rpm_msg_ram: memory@60000 {
-			reg = <0x0 0x60000 0x0 0x6000>;
+			reg = <0x0 0x00060000 0x0 0x6000>;
 			no-map;
 		};
 
@@ -181,7 +181,7 @@ soc: soc {
 
 		prng: qrng@e1000 {
 			compatible = "qcom,prng-ee";
-			reg = <0x0 0xe3000 0x0 0x1000>;
+			reg = <0x0 0x000e3000 0x0 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
@@ -388,7 +388,7 @@ v2m@0 {
 
 		pcie_phy: phy@84000 {
 			compatible = "qcom,ipq6018-qmp-pcie-phy";
-			reg = <0x0 0x84000 0x0 0x1bc>; /* Serdes PLL */
+			reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -404,10 +404,10 @@ pcie_phy: phy@84000 {
 				      "common";
 
 			pcie_phy0: phy@84200 {
-				reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */
-				      <0x0 0x84400 0x0 0x200>, /* Serdes Rx */
-				      <0x0 0x84800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
-				      <0x0 0x84c00 0x0 0xf4>; /* pcs_misc */
+				reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
+				      <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
+				      <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
+				      <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
 				#phy-cells = <0>;
 
 				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
@@ -623,7 +623,7 @@ mdio: mdio@90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
-			reg = <0x0 0x90000 0x0 0x64>;
+			reg = <0x0 0x00090000 0x0 0x64>;
 			clocks = <&gcc GCC_MDIO_AHB_CLK>;
 			clock-names = "gcc_mdio_ahb_clk";
 			status = "disabled";
@@ -631,7 +631,7 @@ mdio: mdio@90000 {
 
 		qusb_phy_1: qusb@59000 {
 			compatible = "qcom,ipq6018-qusb2-phy";
-			reg = <0x0 0x059000 0x0 0x180>;
+			reg = <0x0 0x00059000 0x0 0x180>;
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
@@ -664,7 +664,7 @@ usb2: usb@70f8800 {
 
 			dwc_1: usb@7000000 {
 			       compatible = "snps,dwc3";
-			       reg = <0x0 0x7000000 0x0 0xcd00>;
+			       reg = <0x0 0x07000000 0x0 0xcd00>;
 			       interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 			       phys = <&qusb_phy_1>;
 			       phy-names = "usb2-phy";
@@ -679,7 +679,7 @@ dwc_1: usb@7000000 {
 
 		ssphy_0: ssphy@78000 {
 			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x78000 0x0 0x1c4>;
+			reg = <0x0 0x00078000 0x0 0x1c4>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -708,7 +708,7 @@ usb0_ssphy: phy@78200 {
 
 		qusb_phy_0: qusb@79000 {
 			compatible = "qcom,ipq6018-qusb2-phy";
-			reg = <0x0 0x079000 0x0 0x180>;
+			reg = <0x0 0x00079000 0x0 0x180>;
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-- 
2.39.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux