Hi Duke,
On Fri, 30 Dec 2022 at 08:57, Duke Xin(辛安文) <duke_xinanwen@xxxxxxx> wrote:
>
> The project is based on Qualcomm's sdx6x chips for laptop,so the mhi interface definition and
> enumeration align with previous Quectel sdx24 configuration
>
> Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@xxxxxxx>
> ---
> drivers/bus/mhi/host/pci_generic.c | 46 ++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index f39657f71483..83f40617af9a 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -335,6 +335,50 @@ static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = {
> .sideband_wake = true,
> };
>
> +static const struct mhi_channel_config mhi_quectel_rm5xx_channels[] = {
> + MHI_CHANNEL_CONFIG_UL(0, "NMEA", 32, 0),
> + MHI_CHANNEL_CONFIG_DL(1, "NMEA", 32, 0),
> + MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
> + MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0),
> + MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1),
> + MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1),
> + MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
> + MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
> + MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
> + MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
> + /* The EDL firmware is a flash-programmer exposing firehose protocol */
> + MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
> + MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
> + MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
> + MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
> +};
> +
> +static struct mhi_event_config mhi_quectel_rm5xx_events[] = {
> + MHI_EVENT_CONFIG_CTRL(0, 128),
> + MHI_EVENT_CONFIG_DATA(1, 128),
> + MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
> + MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101)
> +};
> +
> +static const struct mhi_controller_config modem_quectel_rm5xx_config = {
> + .max_channels = 128,
> + .timeout_ms = 20000,
> + .num_channels = ARRAY_SIZE(mhi_quectel_rm5xx_channels),
> + .ch_cfg = mhi_quectel_rm5xx_channels,
> + .num_events = ARRAY_SIZE(mhi_quectel_rm5xx_events),
> + .event_cfg = mhi_quectel_rm5xx_events,
> +};
> +
> +static const struct mhi_pci_dev_info mhi_quectel_rm5xx_info = {
> + .name = "quectel-rm5xx",
> + .edl = "qcom/prog_firehose_sdx6x.elf",
> + .config = &modem_quectel_rm5xx_config,
Use `modem_quectel_em1xx_config` if compatible instead of duplicating
the configuration.
Regards,
Loic
