[PATCH 04/18] arm64: dts: qcom: ipq6018: Fix up some indentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some properties were not indented consistently. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 40 +++++++++++++--------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 2026000f3dc7..5452bb85f8e1 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -249,7 +249,7 @@ qusb_phy_0: qusb@79000 {
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-				<&xo>;
+				 <&xo>;
 			clock-names = "cfg_ahb", "ref";
 
 			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
@@ -265,11 +265,11 @@ pcie_phy: phy@84000 {
 			ranges;
 
 			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
-				<&gcc GCC_PCIE0_AHB_CLK>;
+				 <&gcc GCC_PCIE0_AHB_CLK>;
 			clock-names = "aux", "cfg_ahb";
 
 			resets = <&gcc GCC_PCIE0_PHY_BCR>,
-				<&gcc GCC_PCIE0PHY_PHY_BCR>;
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
 
@@ -319,8 +319,8 @@ crypto: crypto@73a000 {
 			compatible = "qcom,crypto-v5.1";
 			reg = <0x0 0x0073a000 0x0 0x6000>;
 			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
-				<&gcc GCC_CRYPTO_AXI_CLK>,
-				<&gcc GCC_CRYPTO_CLK>;
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
 			clock-names = "iface", "bus", "core";
 			dmas = <&cryptobam 2>, <&cryptobam 3>;
 			dma-names = "rx", "tx";
@@ -425,7 +425,7 @@ blsp1_uart3: serial@78b1000 {
 			reg = <0x0 0x078b1000 0x0 0x200>;
 			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
 		};
@@ -438,7 +438,7 @@ blsp1_spi1: spi@78b5000 {
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			spi-max-frequency = <50000000>;
 			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
 			dma-names = "tx", "rx";
@@ -453,7 +453,7 @@ blsp1_spi2: spi@78b6000 {
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			spi-max-frequency = <50000000>;
 			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
 			dma-names = "tx", "rx";
@@ -511,8 +511,8 @@ qpic_nand: nand-controller@79b0000 {
 			clock-names = "core", "aon";
 
 			dmas = <&qpic_bam 0>,
-				<&qpic_bam 1>,
-				<&qpic_bam 2>;
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
 			dma-names = "tx", "rx", "cmd";
 			pinctrl-0 = <&qpic_pins>;
 			pinctrl-names = "default";
@@ -527,13 +527,13 @@ usb3: usb@8af8800 {
 			ranges;
 
 			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
-				<&gcc GCC_USB0_MASTER_CLK>,
-				<&gcc GCC_USB0_SLEEP_CLK>,
-				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				 <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			clock-names = "cfg_noc",
-				"core",
-				"sleep",
-				"mock_utmi";
+				      "core",
+				      "sleep",
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
 					  <&gcc GCC_USB0_MASTER_CLK>,
@@ -568,10 +568,10 @@ intc: interrupt-controller@b000000 {
 			#size-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <0x3>;
-			reg =   <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
-				<0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
-				<0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
-				<0x0 0x0b004000 0x0 0x1000>;  /*GICV*/
+			reg = <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
+			      <0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
+			      <0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
+			      <0x0 0x0b004000 0x0 0x1000>;  /*GICV*/
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			ranges = <0 0 0 0xb00a000 0 0xffd>;
 
-- 
2.39.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux