[PATCH 02/18] arm64: dts: qcom: ipq6018: Use tabs instead of spaces

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The dwc3 subnode was indented using spaces for some reason. Fix it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 17e15a06254f..4b74eee35971 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -706,17 +706,17 @@ usb2: usb@70f8800 {
 			status = "disabled";
 
 			dwc_1: usb@7000000 {
-			       compatible = "snps,dwc3";
-			       reg = <0x0 0x07000000 0x0 0xcd00>;
-			       interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			       phys = <&qusb_phy_1>;
-			       phy-names = "usb2-phy";
-			       tx-fifo-resize;
-			       snps,is-utmi-l1-suspend;
-			       snps,hird-threshold = /bits/ 8 <0x0>;
-			       snps,dis_u2_susphy_quirk;
-			       snps,dis_u3_susphy_quirk;
-			       dr_mode = "host";
+				compatible = "snps,dwc3";
+				reg = <0x0 0x07000000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
 			};
 		};
 
-- 
2.39.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux