On Wed, Dec 28, 2022 at 05:32:09PM +0800, Yang Yingliang wrote:
> Add missing clk_disable_unprepare() in the error path in geni_i2c_probe().
>
> Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant")
> Signed-off-by: Yang Yingliang <yangyingliang@xxxxxxxxxx>
Nice.
> ---
> drivers/i2c/busses/i2c-qcom-geni.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index fd70794bfcee..f292e4dab98f 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -859,6 +859,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
> ret = geni_se_resources_on(&gi2c->se);
> if (ret) {
> dev_err(dev, "Error turning on resources %d\n", ret);
> + clk_disable_unprepare(gi2c->core_clk);
> return ret;
> }
> proto = geni_se_read_proto(&gi2c->se);
> @@ -878,8 +879,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
> /* FIFO is disabled, so we can only use GPI DMA */
> gi2c->gpi_mode = true;
> ret = setup_gpi_dma(gi2c);
> - if (ret)
> + if (ret) {
> + clk_disable_unprepare(gi2c->core_clk);
If I'm not mistaken, we need a geni_se_resources_off() here as well.
> return dev_err_probe(dev, ret, "Failed to setup GPI DMA mode\n");
> + }
>
> dev_dbg(dev, "Using GPI DMA mode for I2C\n");
> } else {
> @@ -892,6 +895,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
>
> if (!tx_depth) {
> dev_err(dev, "Invalid TX FIFO depth\n");
Same here.
Regards,
Bjorn
> + clk_disable_unprepare(gi2c->core_clk);
> return -EINVAL;
> }
>
> --
> 2.25.1
>
