Re: [PATCH v5 01/17] EDAC/device: Make use of poll_msec value in edac_device_ctl_info struct

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 28, 2022 at 02:10:12PM +0530, Manivannan Sadhasivam wrote:
> The EDAC drivers may optionally pass the poll_msec value. Use that value if
> available, else fall back to 1000ms.

Use this version for your next submission pls:

---
From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Date: Wed, 28 Dec 2022 14:10:12 +0530
Subject: [PATCH] EDAC/device: Respect any driver-supplied workqueue polling value

The EDAC drivers may optionally pass the poll_msec value. Use that value
if available, else fall back to 1000ms.

  [ bp: Touchups. ]

Fixes: e27e3dac6517 ("drivers/edac: add edac_device class")
Reported-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Borislav Petkov (AMD) <bp@xxxxxxxxx>
Tested-by: Steev Klimaszewski <steev@xxxxxxxx> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@xxxxxxxxxx> # sa8540p-ride
Cc: <stable@xxxxxxxxxxxxxxx> # 4.9
Link: https://lore.kernel.org/r/COZYL8MWN97H.MROQ391BGA09@otso
---
 drivers/edac/edac_device.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 19522c568aa5..a50b7bcfb731 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -34,6 +34,9 @@
 static DEFINE_MUTEX(device_ctls_mutex);
 static LIST_HEAD(edac_device_list);
 
+/* Default workqueue processing interval on this instance, in msecs */
+#define DEFAULT_POLL_INTERVAL 1000
+
 #ifdef CONFIG_EDAC_DEBUG
 static void edac_device_dump_device(struct edac_device_ctl_info *edac_dev)
 {
@@ -336,7 +339,7 @@ static void edac_device_workq_function(struct work_struct *work_req)
 	 * whole one second to save timers firing all over the period
 	 * between integral seconds
 	 */
-	if (edac_dev->poll_msec == 1000)
+	if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL)
 		edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay));
 	else
 		edac_queue_work(&edac_dev->work, edac_dev->delay);
@@ -366,7 +369,7 @@ static void edac_device_workq_setup(struct edac_device_ctl_info *edac_dev,
 	 * timers firing on sub-second basis, while they are happy
 	 * to fire together on the 1 second exactly
 	 */
-	if (edac_dev->poll_msec == 1000)
+	if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL)
 		edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay));
 	else
 		edac_queue_work(&edac_dev->work, edac_dev->delay);
@@ -398,7 +401,7 @@ void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev,
 {
 	unsigned long jiffs = msecs_to_jiffies(value);
 
-	if (value == 1000)
+	if (value == DEFAULT_POLL_INTERVAL)
 		jiffs = round_jiffies_relative(value);
 
 	edac_dev->poll_msec = value;
@@ -443,11 +446,7 @@ int edac_device_add_device(struct edac_device_ctl_info *edac_dev)
 		/* This instance is NOW RUNNING */
 		edac_dev->op_state = OP_RUNNING_POLL;
 
-		/*
-		 * enable workq processing on this instance,
-		 * default = 1000 msec
-		 */
-		edac_device_workq_setup(edac_dev, 1000);
+		edac_device_workq_setup(edac_dev, edac_dev->poll_msec ?: DEFAULT_POLL_INTERVAL);
 	} else {
 		edac_dev->op_state = OP_RUNNING_INTERRUPT;
 	}
-- 
2.35.1

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux