Move the new 'regulator-vph-pwr' node before the wlan regulator node to
restore the root-node sort order (alphabetically by node name).
While at it, add a couple of newlines to separate the properties for
consistency with the other regulator nodes.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
.../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index aeb9e1800f71..0201c6776746 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -95,6 +95,16 @@ vreg_nvme: regulator-nvme {
regulator-boot-on;
};
+ vreg_vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VPH_VCC3R9";
+ regulator-min-microvolt = <3900000>;
+ regulator-max-microvolt = <3900000>;
+
+ regulator-always-on;
+ };
+
vreg_wlan: regulator-wlan {
compatible = "regulator-fixed";
@@ -127,14 +137,6 @@ vreg_wwan: regulator-wwan {
regulator-boot-on;
};
- vreg_vph_pwr: regulator-vph-pwr {
- compatible = "regulator-fixed";
- regulator-name = "VPH_VCC3R9";
- regulator-min-microvolt = <3900000>;
- regulator-max-microvolt = <3900000>;
- regulator-always-on;
- };
-
thermal-zones {
skin-temp-thermal {
polling-delay-passive = <250>;
--
2.37.4
