The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
Reported-by: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
Tested-by: Steev Klimaszewski <steev@xxxxxxxx> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@xxxxxxxxxx> # sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 109c9d2b684d..0510a5d510e7 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1856,8 +1856,14 @@ opp-6 {
system-cache-controller@9200000 {
compatible = "qcom,sc8280xp-llcc";
- reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
- reg-names = "llcc_base", "llcc_broadcast_base";
+ reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+ <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+ <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+ <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+ <0 0x09600000 0 0x58000>;
+ reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+ "llcc3_base", "llcc4_base", "llcc5_base",
+ "llcc6_base", "llcc7_base", "llcc_broadcast_base";
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
--
2.25.1
