Re: [PATCH 2/4] arm64: dts: qcom: align OPP table node name with DT schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Dec 25, 2022 at 12:58:42PM +0100, Krzysztof Kozlowski wrote:
> Bindings expect OPP tables to start with "opp-table".
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi | 2 +-
>  arch/arm64/boot/dts/qcom/sa8540p.dtsi      | 4 ++--
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi     | 6 +++---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi       | 2 +-
>  4 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi
> index 5728583af41e..929bdcd45d02 100644
 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 109c9d2b684d..89004cb657e0 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -33,7 +33,7 @@ sleep_clk: sleep-clk {
>  		};
>  	};
>  
> -	cpu0_opp_table: cpu0-opp-table {
> +	cpu0_opp_table: opp-table-cpu0 {
>  		compatible = "operating-points-v2";
>  		opp-shared;
>  
> @@ -123,7 +123,7 @@ opp-2438400000 {
>  		};
>  	};
>  
> -	cpu4_opp_table: cpu4-opp-table {
> +	cpu4_opp_table: opp-table-cpu4 {
>  		compatible = "operating-points-v2";
>  		opp-shared;
>  
> @@ -591,7 +591,7 @@ CLUSTER_PD: cpu-cluster0 {
>  		};
>  	};
>  
> -	qup_opp_table_100mhz: qup-100mhz-opp-table {
> +	qup_opp_table_100mhz: opp-table-qup100mhz {
>  		compatible = "operating-points-v2";
>  
>  		opp-75000000 {

Please also move these nodes after the 'memory' node so that they remain
sorted by name.

Johan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux