On Fri, Dec 23, 2022 at 03:31:52PM -0800, Wesley Cheng wrote:
> For USB HCDs that can support multiple USB interrupters, expose functions
> that class drivers can utilize for setting up secondary interrupters.
> Class drivers can pass this information to its respective clients, i.e.
> a dedicated DSP.
>
> Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
> ---
> drivers/usb/core/hcd.c | 86 +++++++++++++++++++++++++++++++++++++++++
> include/linux/usb.h | 7 ++++
> include/linux/usb/hcd.h | 16 +++++++-
> 3 files changed, 108 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> index 8300baedafd2..90ead90faf1d 100644
> --- a/drivers/usb/core/hcd.c
> +++ b/drivers/usb/core/hcd.c
> +/**
> + * usb_hcd_stop_endpoint - Halt USB EP transfers
> + * @udev: usb device
> + * @ep: usb ep to stop
> + *
> + * Stop pending transfers on a specific USB endpoint.
> + **/
> +int usb_hcd_stop_endpoint(struct usb_device *udev,
> + struct usb_host_endpoint *ep)
> +{
> + struct usb_hcd *hcd = bus_to_hcd(udev->bus);
> + int ret = 0;
> +
> + if (hcd->driver->stop_endpoint)
> + ret = hcd->driver->stop_endpoint(hcd, udev, ep);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(usb_hcd_stop_endpoint);
You know, there already is a function that does this. It's named
usb_hcd_flush_endpoint(). No need to add another function that does the
same thing.
Alan Stern
