UFS PHY in SM8450 SoC is capable of operating at HS G4 mode and the init
sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance
reusing the G4 init sequence of SM8350.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Tested-by: Andrew Halaney <ahalaney@xxxxxxxxxx> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 75e55c4181c9..96e03d4249da 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -935,6 +935,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
.serdes = sm8350_ufsphy_hs_b_serdes,
.serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
},
+ .tbls_hs_g4 = {
+ .tx = sm8350_ufsphy_g4_tx,
+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx),
+ .rx = sm8350_ufsphy_g4_rx,
+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx),
+ .pcs = sm8350_ufsphy_g4_pcs,
+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
+ },
.clk_list = sm8450_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
.vreg_list = qmp_phy_vreg_l,
--
2.25.1
