[PATCH v2 1/8] drm/msm/dpu: Wire up DSC mask for active CTL configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Active CTLs have to configure what DSC block(s) have to be enabled, and
what DSC block(s) have to be flushed; this value was initialized to zero
resulting in the necessary register writes to never happen (or would
write zero otherwise).  This seems to have gotten lost in the DSC v4->v5
series while refactoring how the combination with merge_3d was handled.

Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index ae28b2b93e69..35791f93c33d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -61,6 +61,7 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
 	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
 	intf_cfg.stream_sel = cmd_enc->stream_sel;
 	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
 	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
 
 	/* setup which pp blk will connect to this intf */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index 0f71e8fe7be7..9ee3a7306a5f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -274,6 +274,7 @@ static void dpu_encoder_phys_vid_setup_timing_engine(
 	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_VID;
 	intf_cfg.stream_sel = 0; /* Don't care value for video mode */
 	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
 	if (phys_enc->hw_pp->merge_3d)
 		intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
 
-- 
2.39.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux