Re: [PATCH v4 08/20] thermal/drivers/tsens: fix slope values for msm8939

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 21.12.2022 03:05, Dmitry Baryshkov wrote:
> According to the vendor kernels (msm-3.10, 3.14 and 3.18), msm8939
> uses non-standard slope values for calibrating the sensors. Fill them
> accordingly.
> 
> Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939")
> Cc: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  drivers/thermal/qcom/tsens-v0_1.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
> index 57ac23f9d9b7..be173220a939 100644
> --- a/drivers/thermal/qcom/tsens-v0_1.c
> +++ b/drivers/thermal/qcom/tsens-v0_1.c
> @@ -534,6 +534,20 @@ static int calibrate_9607(struct tsens_priv *priv)
>  	return 0;
>  }
>  
> +static int __init init_8939(struct tsens_priv *priv) {
> +	priv->sensor[0].slope = 2911;
> +	priv->sensor[1].slope = 2789;
> +	priv->sensor[2].slope = 2906;
> +	priv->sensor[3].slope = 2763;
> +	priv->sensor[4].slope = 2922;
> +	priv->sensor[5].slope = 2867;
> +	priv->sensor[6].slope = 2833;
> +	priv->sensor[7].slope = 2838;
> +	priv->sensor[8].slope = 2840;
> +
> +	return init_common(priv);
> +}
> +
>  /* v0.1: 8916, 8939, 8974, 9607 */
>  
>  static struct tsens_features tsens_v0_1_feat = {
> @@ -599,7 +613,7 @@ struct tsens_plat_data data_8916 = {
>  };
>  
>  static const struct tsens_ops ops_8939 = {
> -	.init		= init_common,
> +	.init		= init_8939,
>  	.calibrate	= calibrate_8939,
>  	.get_temp	= get_temp_common,
>  };



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux