Re: [PATCH v3 11/15] thermal/drivers/tsens: Support using nvmem cells for msm8974 calibration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 20.12.2022 03:47, Dmitry Baryshkov wrote:
> MSM8974 has two sets of calibration data: main one and backup. Add
> support for parsing both sets of calibration data from nvmem cells.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  drivers/thermal/qcom/tsens-v0_1.c | 50 +++++++++++++++++++++++++++++++
>  drivers/thermal/qcom/tsens.c      | 39 +++++++++++++++++++-----
>  drivers/thermal/qcom/tsens.h      |  1 +
>  3 files changed, 82 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
> index caffcf9905b9..6a11b8b196b9 100644
> --- a/drivers/thermal/qcom/tsens-v0_1.c
> +++ b/drivers/thermal/qcom/tsens-v0_1.c
> @@ -3,6 +3,7 @@
>   * Copyright (c) 2015, The Linux Foundation. All rights reserved.
>   */
>  
> +#include <linux/nvmem-consumer.h>
>  #include <linux/platform_device.h>
>  #include "tsens.h"
>  
> @@ -194,6 +195,50 @@ static int calibrate_8916(struct tsens_priv *priv)
>  	return 0;
>  }
>  
> +static int calibrate_8974_nvmem(struct tsens_priv *priv)
> +{
> +	int i, ret, mode;
> +	u32 p1[11], p2[11];
> +	u32 backup;
> +
> +	ret = nvmem_cell_read_variable_le_u32(priv->dev, "use_backup", &backup);
> +	if (ret == -ENOENT)
> +		dev_warn(priv->dev, "Please migrate to separate nvmem cells for calibration data\n");
> +	if (ret < 0)
> +		return ret;
> +
> +	mode = tsens_read_calibration(priv, 2, p1, p2, backup == BKP_SEL);
> +	if (mode < 0)
> +		return mode;
> +
> +	if (mode == NO_PT_CALIB) {
> +		p1[0] += 2;
> +		p1[1] += 9;
> +		p1[2] += 3;
> +		p1[3] += 9;
> +		p1[4] += 5;
> +		p1[5] += 9;
> +		p1[6] += 7;
> +		p1[7] += 10;
> +		p1[8] += 8;
> +		p1[9] += 9;
> +		p1[10] += 8;
> +	} else {
> +		for (i = 0; i < priv->num_sensors; i++) {
> +			/*
> +			 * ONE_PT_CALIB requires using addition here instead of
> +			 * using OR operation.
> +			 */
> +			p1[i] += BIT_APPEND;
> +			p2[i] += BIT_APPEND;
> +		}
> +	}
> +
> +	compute_intercept_slope(priv, p1, p2, mode);
> +
> +	return 0;
> +}
> +
>  static int calibrate_8974(struct tsens_priv *priv)
>  {
>  	int base1 = 0, base2 = 0, i;
> @@ -201,6 +246,11 @@ static int calibrate_8974(struct tsens_priv *priv)
>  	int mode = 0;
>  	u32 *calib, *bkp;
>  	u32 calib_redun_sel;
> +	int ret;
> +
> +	ret = calibrate_8974_nvmem(priv);
> +	if (ret == 0)
> +		return 0;
>  
>  	calib = (u32 *)qfprom_read(priv->dev, "calib");
>  	if (IS_ERR(calib))
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 68aef0ed6182..83bf60fa9008 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -70,18 +70,21 @@ char *qfprom_read(struct device *dev, const char *cname)
>  	return ret;
>  }
>  
> -int tsens_calibrate_nvmem(struct tsens_priv *priv, int shift)
> +int tsens_read_calibration(struct tsens_priv *priv, int shift, u32 *p1, u32 *p2, bool backup)
>  {
>  	u32 mode;
>  	u32 base1, base2;
> -	u32 p1[MAX_SENSORS], p2[MAX_SENSORS];
> -	char name[] = "sXX_pY"; /* s10_p1 */
> +	char name[] = "sXX_pY_backup"; /* s10_p1_backup */
>  	int i, ret;
>  
>  	if (priv->num_sensors > MAX_SENSORS)
>  		return -EINVAL;
>  
> -	ret = nvmem_cell_read_variable_le_u32(priv->dev, "mode", &mode);
> +	ret = snprintf(name, sizeof(name), "mode%s", backup ? "_backup" : "");
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = nvmem_cell_read_variable_le_u32(priv->dev, name, &mode);
>  	if (ret == -ENOENT)
>  		dev_warn(priv->dev, "Please migrate to separate nvmem cells for calibration data\n");
>  	if (ret < 0)
> @@ -89,16 +92,24 @@ int tsens_calibrate_nvmem(struct tsens_priv *priv, int shift)
>  
>  	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
>  
> -	ret = nvmem_cell_read_variable_le_u32(priv->dev, "base1", &base1);
> +	ret = snprintf(name, sizeof(name), "base1%s", backup ? "_backup" : "");
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = nvmem_cell_read_variable_le_u32(priv->dev, name, &base1);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = snprintf(name, sizeof(name), "base2%s", backup ? "_backup" : "");
>  	if (ret < 0)
>  		return ret;
>  
> -	ret = nvmem_cell_read_variable_le_u32(priv->dev, "base2", &base2);
> +	ret = nvmem_cell_read_variable_le_u32(priv->dev, name, &base2);
>  	if (ret < 0)
>  		return ret;
>  
>  	for (i = 0; i < priv->num_sensors; i++) {
> -		ret = snprintf(name, sizeof(name), "s%d_p1", i);
> +		ret = snprintf(name, sizeof(name), "s%d_p1%s", i, backup ? "_backup" : "");
>  		if (ret < 0)
>  			return ret;
>  
> @@ -106,7 +117,7 @@ int tsens_calibrate_nvmem(struct tsens_priv *priv, int shift)
>  		if (ret)
>  			return ret;
>  
> -		ret = snprintf(name, sizeof(name), "s%d_p2", i);
> +		ret = snprintf(name, sizeof(name), "s%d_p2%s", i, backup ? "_backup" : "");
>  		if (ret < 0)
>  			return ret;
>  
> @@ -136,6 +147,18 @@ int tsens_calibrate_nvmem(struct tsens_priv *priv, int shift)
>  		}
>  	}
>  
> +	return mode;
> +}
> +
> +int tsens_calibrate_nvmem(struct tsens_priv *priv, int shift)
> +{
> +	u32 p1[MAX_SENSORS], p2[MAX_SENSORS];
> +	int mode;
> +
> +	mode = tsens_read_calibration(priv, shift, p1, p2, false);
> +	if (mode < 0)
> +		return mode;
> +
>  	compute_intercept_slope(priv, p1, p2, mode);
>  
>  	return 0;
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index 645ae02438fa..a9ae8df9f810 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -585,6 +585,7 @@ struct tsens_priv {
>  };
>  
>  char *qfprom_read(struct device *dev, const char *cname);
> +int tsens_read_calibration(struct tsens_priv *priv, int shift, u32 *p1, u32 *p2, bool backup);
>  int tsens_calibrate_nvmem(struct tsens_priv *priv, int shift);
>  int tsens_calibrate_common(struct tsens_priv *priv);
>  void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux