[PATCH 0/3] Qcom: Add GIC-ITS support to SM8450 PCIe controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

This series adds GIC-ITS support to SM8450 PCIe controllers for receiving
the MSIs from endpoint devices.

The GIC-ITS MSI implementation provides an advantage over internal MSI
implementation using Locality-specific Peripheral Interrupts (LPI) that
would allow MSIs to be targeted for each CPU core.

This series has been tested on SM8450 based dev board that works using an
out-of-tree dts where the MSIs from endpoint devices are distributed across
the CPU cores.

Thanks,
Mani

Manivannan Sadhasivam (3):
  dt-bindings: PCI: qcom: Update maintainers
  dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
  arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1

 .../devicetree/bindings/pci/qcom,pcie.yaml     | 18 ++++++++++++++----
 arch/arm64/boot/dts/qcom/sm8450.dtsi           | 12 ++++++------
 2 files changed, 20 insertions(+), 10 deletions(-)

-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux