[PATCH v3 05/15] arm64: dts: qcom: sc7280: Fix the base addresses of LLCC banks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.

While at it, let's also fix the size of the llcc_broadcast_base to cover
the whole region.

Reported-by: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 0adf13399e64..6c6eb6f4f650 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3579,8 +3579,9 @@ gem_noc: interconnect@9100000 {
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc7280-llcc";
-			reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux