Re: [PATCH v2] drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/12/2022 20:32, Kuogee Hsieh wrote:
There are 3 possible interrupt sources are handled by DP controller,
HPDstatus, Controller state changes and Aux read/write transaction.
At every irq, DP controller have to check isr status of every interrupt
sources and service the interrupt if its isr status bits shows interrupts
are pending. There is potential race condition may happen at current aux
isr handler implementation since it is always complete dp_aux_cmd_fifo_tx()
even irq is not for aux read or write transaction. This may cause aux read
transaction return premature if host aux data read is in the middle of
waiting for sink to complete transferring data to host while irq happen.
This will cause host's receiving buffer contains unexpected data. This
patch fixes this problem by checking aux isr and return immediately at
aux isr handler if there are no any isr status bits set.

Current there is a bug report regrading eDP edid corruption happen during
system booting up. After lengthy debugging to found that VIDEO_READY
interrupt was continuously firing during system booting up which cause
dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data
from aux hardware buffer which is not yet contains complete data transfer
from sink. This cause edid corruption.

Follows are the signature at kernel logs when problem happen,
EDID has corrupt header
panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID
panel-simple-dp-aux aux-aea0000.edp: error -EIO: Couldn't detect panel nor find a fallback

Changes in v2:
-- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr()
-- add more commit text

Usually it's a single dash.


Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")

Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>

There should be no empty lines between the tags.

Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
---
  drivers/gpu/drm/msm/dp/dp_aux.c | 87 +++++++++++++++++++++++++++++------------
  1 file changed, 63 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
index d030a93..f31e5c1 100644
--- a/drivers/gpu/drm/msm/dp/dp_aux.c
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -162,45 +162,78 @@ static ssize_t dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
  	return i;
  }
-static void dp_aux_native_handler(struct dp_aux_private *aux, u32 isr)
+static irqreturn_t dp_aux_native_handler(struct dp_aux_private *aux, u32 isr)
  {
-	if (isr & DP_INTR_AUX_I2C_DONE)
+	irqreturn_t ret = IRQ_NONE;
+
+	if (isr & DP_INTR_AUX_I2C_DONE) {
  		aux->aux_error_num = DP_AUX_ERR_NONE;
-	else if (isr & DP_INTR_WRONG_ADDR)
+		ret = IRQ_HANDLED;
+	} else if (isr & DP_INTR_WRONG_ADDR) {
  		aux->aux_error_num = DP_AUX_ERR_ADDR;
-	else if (isr & DP_INTR_TIMEOUT)
+		ret = IRQ_HANDLED;
+	} else if (isr & DP_INTR_TIMEOUT) {
  		aux->aux_error_num = DP_AUX_ERR_TOUT;
-	if (isr & DP_INTR_NACK_DEFER)
+		ret = IRQ_HANDLED;
+	}
+
+	if (isr & DP_INTR_NACK_DEFER) {
  		aux->aux_error_num = DP_AUX_ERR_NACK;
+		ret = IRQ_HANDLED;
+	}
+
  	if (isr & DP_INTR_AUX_ERROR) {
  		aux->aux_error_num = DP_AUX_ERR_PHY;
  		dp_catalog_aux_clear_hw_interrupts(aux->catalog);
+		ret = IRQ_HANDLED;
  	}
+
+	return ret;
  }
-static void dp_aux_i2c_handler(struct dp_aux_private *aux, u32 isr)
+static irqreturn_t dp_aux_i2c_handler(struct dp_aux_private *aux, u32 isr)
  {
+	irqreturn_t ret = IRQ_NONE;
+
  	if (isr & DP_INTR_AUX_I2C_DONE) {
  		if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
  			aux->aux_error_num = DP_AUX_ERR_NACK;
  		else
  			aux->aux_error_num = DP_AUX_ERR_NONE;
-	} else {
-		if (isr & DP_INTR_WRONG_ADDR)
-			aux->aux_error_num = DP_AUX_ERR_ADDR;
-		else if (isr & DP_INTR_TIMEOUT)
-			aux->aux_error_num = DP_AUX_ERR_TOUT;
-		if (isr & DP_INTR_NACK_DEFER)
-			aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
-		if (isr & DP_INTR_I2C_NACK)
-			aux->aux_error_num = DP_AUX_ERR_NACK;
-		if (isr & DP_INTR_I2C_DEFER)
-			aux->aux_error_num = DP_AUX_ERR_DEFER;
-		if (isr & DP_INTR_AUX_ERROR) {
-			aux->aux_error_num = DP_AUX_ERR_PHY;
-			dp_catalog_aux_clear_hw_interrupts(aux->catalog);
-		}
+
+		return IRQ_HANDLED;
+	}
+
+	if (isr & DP_INTR_WRONG_ADDR) {
+		aux->aux_error_num = DP_AUX_ERR_ADDR;
+		ret = IRQ_HANDLED;
+	} else if (isr & DP_INTR_TIMEOUT) {
+		aux->aux_error_num = DP_AUX_ERR_TOUT;
+		ret = IRQ_HANDLED;
  	}
+
+	if (isr & DP_INTR_NACK_DEFER) {
+		aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
+		ret = IRQ_HANDLED;
+	}
+
+	if (isr & DP_INTR_I2C_NACK) {
+		aux->aux_error_num = DP_AUX_ERR_NACK;
+		ret = IRQ_HANDLED;
+	}
+
+	if (isr & DP_INTR_I2C_DEFER) {
+		aux->aux_error_num = DP_AUX_ERR_DEFER;
+		ret = IRQ_HANDLED;
+	}
+
+	if (isr & DP_INTR_AUX_ERROR) {
+		aux->aux_error_num = DP_AUX_ERR_PHY;
+		dp_catalog_aux_clear_hw_interrupts(aux->catalog);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
  }
static void dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
@@ -413,6 +446,7 @@ void dp_aux_isr(struct drm_dp_aux *dp_aux)
  {
  	u32 isr;
  	struct dp_aux_private *aux;
+	irqreturn_t ret = IRQ_NONE;

No need to assign a value here. It will be overwritten in both of code branches.

if (!dp_aux) {
  		DRM_ERROR("invalid input\n");
@@ -423,15 +457,20 @@ void dp_aux_isr(struct drm_dp_aux *dp_aux)
isr = dp_catalog_aux_get_irq(aux->catalog); + /* no interrupts pending, return immediately */
+	if (!isr)
+		return;
+

A separate commit please.

  	if (!aux->cmd_busy)
  		return;
if (aux->native)
-		dp_aux_native_handler(aux, isr);
+		ret = dp_aux_native_handler(aux, isr);
  	else
-		dp_aux_i2c_handler(aux, isr);
+		ret = dp_aux_i2c_handler(aux, isr);
- complete(&aux->comp);
+	if (ret == IRQ_HANDLED)
+		complete(&aux->comp);

Can you just move the complete() into the individual handling functions? Then you won't have to return the error code from dp_aux_*_handler() at all. You can check `isr' in that function and call complete if there was any error.

Also could you please describe, why is it necessary to complete() condition at all? Judging from your commit message the `if (!isr) return;' part should be enough.

  }
void dp_aux_reconfig(struct drm_dp_aux *dp_aux)

--
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux