Re: [PATCH] arm64: dts: qcom: sc7280: enable IPA in sc7280-herobrine-lte-sku.dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Alex,

Thanks for the patch.

On 12/9/22 00:08, Alex Elder wrote:
IPA is only needed on a platform if it includes a modem, and not all
SC7280 SoC variants do.  The file "sc7280-herobrine-lte-sku.dtsi" is
used to encapsulate definitions related to Chrome OS SC7280 devices
where a modem is present, and that's the proper place for the IPA
node to be enabled.

Currently IPA is enabled in "sc7280-idp.dtsi", which is included by
DTS files for Qualcomm reference platforms (all of which include the
modem).  That also includes "sc7280-herobrine-lte-sku.dtsi", so
enabling IPA there would make it unnecessary for "sc7280-idp.dtsi"
to enable it.

The only other place IPA is enabled is "sc7280-qcard.dtsi".
That file is included only by "sc7280-herobrine.dtsi", which
is (eventually) included only by these top-level DTS files:
   sc7280-herobrine-crd.dts
   sc7280-herobrine-herobrine-r1.dts
   sc7280-herobrine-evoker.dts
   sc7280-herobrine-evoker-lte.dts
   sc7280-herobrine-villager-r0.dts
   sc7280-herobrine-villager-r1.dts
   sc7280-herobrine-villager-r1-lte.dts
All of but two of these include "sc7280-herobrine-lte-sku.dtsi", and
for those cases, enabling IPA there means there is no need for it to
be enabled in "sc7280-qcard.dtsi".

The two remaining cases will no longer enable IPA as a result of
this change:
   sc7280-herobrine-evoker.dts
   sc7280-herobrine-villager-r1.dts
Both of these have "lte" counterparts, and are meant to represent
board variants that do *not* have a modem.

This is exactly the desired configuration.

Signed-off-by: Alex Elder <elder@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 5 +++++
  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi               | 5 -----
  arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi             | 5 -----
  3 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
index ad66e5e9db4ed..956708397f035 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -34,3 +34,8 @@ &remoteproc_mpss {
  &rmtfs_mem {
  	reg = <0x0 0x9c900000 0x0 0x800000>;
  };
+
+&ipa {
+	status = "okay";
+	modem-init;
+};

nit; You'll probably want to move the ipa node above remoteproc node to
maintain sorting.

Reviewed-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Tested-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index f7efb9966afd1..0ddbe7f732bd9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -376,11 +376,6 @@ &gpi_dma1 {
  	status = "okay";
  };
-&ipa {
-	status = "okay";
-	modem-init;
-};
-
  &lpass_cpu {
  	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index df49564ae6dc1..cd6ee84b36fd4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -336,11 +336,6 @@ vreg_bob: bob {
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&ipa {
-	status = "okay";
-	modem-init;
-};
-
  &lpass_va_macro {
  	vdd-micb-supply = <&vreg_bob>;
  };



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux