On 15.12.2022 00:20, Marijn Suijten wrote:
> These seem to have previously been excluded due to either not residing
> on the test board, and/or lacking VADC_USB_DP/VADC_USB_DM definitions.
> Now that the channel constants are included in dt-bindings, add the
> channels to DT as well.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/pmi8950.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
> index 7a857b2f3a5a..42a867685275 100644
> --- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
> @@ -69,6 +69,30 @@ adc-chan@d {
> qcom,pre-scaling = <1 1>;
> label = "chg_temp";
> };
> +
> + adc-chan@e {
> + reg = <VADC_GND_REF>;
> + qcom,pre-scaling = <1 1>;
> + label = "ref_gnd";
> + };
> +
> + adc-chan@f {
> + reg = <VADC_VDD_VADC>;
> + qcom,pre-scaling = <1 1>;
> + label = "ref_vdd";
> + };
> +
> + adc-chan@43 {
> + reg = <VADC_USB_DP>;
> + qcom,pre-scaling = <1 1>;
> + label = "usb_dp";
> + };
> +
> + adc-chan@44 {
> + reg = <VADC_USB_DM>;
> + qcom,pre-scaling = <1 1>;
> + label = "usb_dm";
> + };
> };
>
> pmi8950_mpps: mpps@a000 {
