Re: [PATCH v4 2/2] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/12/2022 19:59, Melody Olvera wrote:
> 
>>
>>> +			#clock-cells = <0>;
>>> +		};
>>> +
>>> +		sleep_clk: sleep-clk {
>>> +			compatible = "fixed-clock";
>>> +			clock-frequency = <32000>;
>>> +			#clock-cells = <0>;
>>> +		};
>>> +
>>> +		pcie_0_pipe_clk: pcie-0-pipe-clk {
>> Afaict these clocks are not referenced anywhere, so please skip them.
> 
> Yes, so I included them to be consistent with the bindings. They will be needed later;
> should I still remove?
> 

If they are not referenced anywhere, how is it consistent with bindings?
Where do the bindings require defining such nodes?

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux