On Tue, Dec 13, 2022 at 04:18:00AM +0300, Dmitry Baryshkov wrote:
> >diff --git a/arch/arm64/boot/dts/qcom/pm8450a.dtsi b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> >index 34fc72896761..af761dbfbc66 100644
> >--- a/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> >+++ b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> >@@ -13,6 +13,14 @@ pm8450a: pmic@0 {
> > #address-cells = <1>;
> > #size-cells = <0>;
> >
> >+ rtc@6000 {
> >+ compatible = "qcom,pm8941-rtc";
> >+ reg = <0x6000>;
> >+ reg-names = "rtc", "alarm";
> >+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
>
>
> 0x60?
Checking downstream it uses 0x61 for the ppid. This is also the case
for all other descriptions of that RTC I could find. On the other hand,
that does not describe the "alarm" register bank at 0x6100.
Should it be added, if anything to match reg-names?
I tried a quick test of the alarm on sa8540p-ride:
$ echo $(date '+%s' -d '+ 10 seconds') > /sys/class/rtc/rtc0/wakealarm
It logged the interrupt:
172: 3 0 0 0 0 0 0 0 pmic_arb 101777441 Edge pm8xxx_rtc_alarm
--
Eric Chanudet
