Keep only one clock frequency for timer, because:
1. DT schema does not allow multiple frequencies in such property,
2. The Linux timer driver reads only first frequency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-mdm9615.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index b0fe1d95d88f..a6331e5ebe09 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -84,8 +84,7 @@ timer@200a000 {
<GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
reg = <0x0200a000 0x100>;
- clock-frequency = <27000000>,
- <32768>;
+ clock-frequency = <27000000>;
cpu-offset = <0x80000>;
};
--
2.34.1
