The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
On SM6350, there is only one LLCC bank available. So only change needed is
to remove the reg-names property from LLCC node to conform to the binding.
The driver is expected to parse the reg field based on index to get the
addresses of each LLCC banks.
Cc: <stable@xxxxxxxxxxxxxxx> # 5.16
Fixes: ced2f0d75e13 ("arm64: dts: qcom: sm6350: Add LLCC node")
Reported-by: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 43324bf291c3..1f39627cd7c6 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1174,7 +1174,6 @@ dc_noc: interconnect@9160000 {
system-cache-controller@9200000 {
compatible = "qcom,sm6350-llcc";
reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
- reg-names = "llcc_base", "llcc_broadcast_base";
};
gem_noc: interconnect@9680000 {
--
2.25.1
