Re: [RFC PATCH] arm64: dts: qcom: Use plural _gpios node label for PMIC gpios

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/12/2022 23:04, Marijn Suijten wrote:
> The gpio node in PMIC dts'es define access to multiple GPIOs.  Most Qcom
> PMICs were already using the plural _gpios label to point to this node,
> but a few PMICs were left behind including the recently-pulled
> pm(i)8950.
> 
> Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005,
> pm(i)8950, and pm(i)8998.
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> 
> ---
> 
> This was brought up for discussion in [1] but hasn't seen any relevant
> reply, unfortunately.

This is just a label, it does not matter. Why changing all exisitng
files? I don't think it was a part of previous discussions...

To me it is unneeded churn.

> 
> [1]: https://lore.kernel.org/linux-arm-msm/20221104234435.xwjpwfxs73puvfca@xxxxxxxxxxxxxx/
> ---
>  arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts  |  8 ++++----
>  .../dts/qcom/msm8998-oneplus-cheeseburger.dts    |  4 ++--
>  .../boot/dts/qcom/msm8998-oneplus-common.dtsi    |  6 +++---
>  .../qcom/msm8998-sony-xperia-yoshino-maple.dts   |  4 ++--
>  .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi    | 16 ++++++++--------
>  .../arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts |  4 ++--
>  arch/arm64/boot/dts/qcom/pm6125.dtsi             |  4 ++--
>  arch/arm64/boot/dts/qcom/pm6150.dtsi             |  4 ++--
>  arch/arm64/boot/dts/qcom/pm6150l.dtsi            |  4 ++--
>  arch/arm64/boot/dts/qcom/pm8005.dtsi             |  4 ++--
>  arch/arm64/boot/dts/qcom/pm8950.dtsi             |  4 ++--
>  arch/arm64/boot/dts/qcom/pm8998.dtsi             |  4 ++--
>  arch/arm64/boot/dts/qcom/pmi8950.dtsi            |  4 ++--
>  arch/arm64/boot/dts/qcom/pmi8998.dtsi            |  4 ++--
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts          |  4 ++--
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi     |  4 ++--
>  arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi       |  4 ++--
>  arch/arm64/boot/dts/qcom/sdm845-db845c.dts       | 16 ++++++++--------
>  arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi   |  4 ++--
>  .../boot/dts/qcom/sdm845-oneplus-common.dtsi     |  6 +++---
>  .../arm64/boot/dts/qcom/sdm845-shift-axolotl.dts |  4 ++--
>  .../boot/dts/qcom/sdm845-sony-xperia-tama.dtsi   |  2 +-
>  .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi |  4 ++--
>  .../boot/dts/qcom/sdm845-xiaomi-polaris.dts      |  4 ++--
>  .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts |  2 +-
>  25 files changed, 64 insertions(+), 64 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
> index 310f7a2df1e8..0e273938b59d 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
> @@ -113,7 +113,7 @@ gpio-keys {
>  			    <&cam_snapshot_pin_a>;
>  		button-vol-up {
>  			label = "Volume Up";
> -			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
> +			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
>  			linux,input-type = <EV_KEY>;
>  			linux,code = <KEY_VOLUMEUP>;

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux