[PATCH v3 4/4] arm64: dts: qcom: sc7180: Add pazquel360 touschreen

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The touchscreen was supposed to have been added when pazquel360 first
was added upstream but was missed. Add it now.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---

Changes in v3:
- Removed hid-descr-addr

 .../dts/qcom/sc7180-trogdor-pazquel360.dtsi   | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
index 5702325d0c7b..ff9dd6857f8b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
@@ -14,6 +14,25 @@ &alc5682 {
 	realtek,dmic-clk-rate-hz = <2048000>;
 };
 
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3915", "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+		vccio-supply = <&pp1800_l10a>;
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &keyboard_controller {
 	function-row-physmap = <
 		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
-- 
2.39.0.rc1.256.g54fd8350bd-goog




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux