On Wed, Dec 07, 2022 at 02:00:12PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
>
> The SA8295P ADP has, among other interfaces, six MiniDP connectors which
> are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
>
> Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
> DP PHYs and link them all together.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++++++++++++++++++++-
> 1 file changed, 241 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index 6c29d7d757e0..d55c8c5304cc 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +&mdss0_dp2 {
> + status = "okay";
Please move 'status' last.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss0_dp2_phy_out: endpoint {
> + remote-endpoint = <&edp0_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss0_dp2_phy {
> + status = "okay";
Same here.
> +
> + vdda-phy-supply = <&vreg_l8g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss0_dp3 {
> + status = "okay";
And here.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss0_dp3_phy_out: endpoint {
> + remote-endpoint = <&edp1_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss0_dp3_phy {
> + status = "okay";
And here.
> +
> + vdda-phy-supply = <&vreg_l8g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1 {
> + status = "okay";
> +};
> +
> +&mdss1_dp0 {
> + status = "okay";
And here.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp0_phy_out: endpoint {
> + remote-endpoint = <&dp2_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp0_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp1 {
> + status = "okay";
Ditto.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp1_phy_out: endpoint {
> + remote-endpoint = <&dp3_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp1_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp2 {
> + status = "okay";
Ditto.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp2_phy_out: endpoint {
> + remote-endpoint = <&edp2_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp2_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp3 {
> + status = "okay";
Ditto.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp3_phy_out: endpoint {
> + remote-endpoint = <&edp3_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp3_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> &pcie2a {
> perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
Johan
