Move data-lanes property from mdss_dp node to dp_out endpoint. Also
add link-frequencies property into dp_out endpoint as well. The last
frequency specified at link-frequencies will be the max link rate
supported by DP.
Changes in v5:
-- revert changes at sc7180.dtsi and sc7280.dtsi
-- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
Changes in v6:
-- add data-lanes and link-frequencies to yaml
Changes in v7:
-- change 160000000 to 1620000000
-- separate yaml to different patch
Changes in v8:
-- correct Bjorn mail address to kernel.org
Changes in v9:
-- use symbol rate (hz) for link-frequencies at dp_out at sc7180_trogdor.dtsi
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 6 +++++-
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 6 +++++-
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index eae22e6..93b0cde 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -814,7 +814,11 @@ hp_i2c: &i2c9 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dp_hot_plug_det>;
- data-lanes = <0 1>;
+};
+
+&dp_out {
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
};
&pm6150_adc {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index c11e371..3c7a9d8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -442,7 +442,11 @@ ap_i2c_tpm: &i2c14 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dp_hot_plug_det>;
- data-lanes = <0 1>;
+};
+
+&dp_out {
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_mdp {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
