[PATCH 03/12] arm64: dts: qcom: sdm845: Fix the base addresses of LLCC banks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.

Cc: <stable@xxxxxxxxxxxxxxx> # 5.4
Fixes: ba0411ddd133 ("arm64: dts: sdm845: Add device node for Last level cache controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 65032b94b46d..e1c0d9faf46e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2132,8 +2132,11 @@ uart15: serial@a9c000 {
 
 		llcc: system-cache-controller@1100000 {
 			compatible = "qcom,sdm845-llcc";
-			reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x01100000 0 0x50000>, <0 0x01180000 0 0x50000>,
+			      <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
+			      <0 0x01300000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux