[PATCH v3 9/9] arm64: dts: rockchip: fix touchscreen reset GPIO polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>

The reset line is active low for the Goodix touchscreen controller so
let's fix the polarity in the Device Tree node.

Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/px30-evb.dts          | 2 +-
 arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 2 +-
 arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts   | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index c1bbd555f5f5b..2087dc7299446 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -420,7 +420,7 @@ touchscreen@14 {
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
 		irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-		reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
 		VDDIO-supply = <&vcc3v3_lcd>;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 78157521e9449..e63491fb443be 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -588,7 +588,7 @@ touch: touchscreen@5d {
 		AVDD28-supply = <&vcc3v0_touch>;
 		VDDIO-supply = <&vcc3v0_touch>;
 		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 674792567fa6e..234531aaa430a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -495,7 +495,7 @@ touchscreen0: goodix@14 {
 		irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touch_int &touch_rst>;
-		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
 		VDDIO-supply = <&vcc3v3_lcd0_n>;
 	};
 };

-- 
b4 0.10.1



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux