On 04/12/2022 12:11, Dmitry Baryshkov wrote:
> On Sun, 4 Dec 2022 at 10:46, Krzysztof Kozlowski
> <krzysztof.kozlowski@xxxxxxxxxx> wrote:
>>
>> While changing node names of APQ8084 SDHCI, the ones in IFC6540 board
>> were not updated leading to disabled and misconfigured SDHCI.
>>
>> Cc: <stable@xxxxxxxxxxxxxxx>
>> Fixes: 2477d81901a2 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'")
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>
> Minor nit below.
>
>> ---
>> arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 20 ++++++++++----------
>> arch/arm/boot/dts/qcom-apq8084.dtsi | 4 ++--
>> 2 files changed, 12 insertions(+), 12 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
>> index 44cd72f1b1be..116e59a3b76d 100644
>> --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
>> +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
>> @@ -19,16 +19,16 @@ soc {
>> serial@f995e000 {
>> status = "okay";
>> };
>> + };
>> +};
>>
>> - sdhci@f9824900 {
>> - bus-width = <8>;
>> - non-removable;
>> - status = "okay";
>> - };
>> +&sdhc_1 {
>> + bus-width = <8>;
>> + non-removable;
>> + status = "okay";
>> +};
>>
>> - sdhci@f98a4900 {
>> - cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
>> - bus-width = <4>;
>> - };
>> - };
>> +&sdhc_2 {
>> + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
>> + bus-width = <4>;
>
> Technically this will still be disabled, as there is no 'status = "okay";' here.
>
Yes, but I think this is separate issue, not related to node renaming.
The initial patch which added these said:
"required for enabling the serial port and eMMC."
so I assume SD card controller was meant to stay disabled.
Best regards,
Krzysztof
