There is no dtsi file for msm8976 in the kernel sources. Drop the
compatibility with unofficial dtsi and remove support for handling the
single-cell calibration data on msm8976.
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/thermal/qcom/tsens-v1.c | 126 +-------------------------------
1 file changed, 2 insertions(+), 124 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 2684c4a0941a..51bcf2a93773 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -21,63 +21,6 @@
#define TM_HIGH_LOW_INT_STATUS_OFF 0x0088
#define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF 0x0090
-/* eeprom layout data for msm8956/76 (v1) */
-#define MSM8976_BASE0_MASK 0xff
-#define MSM8976_BASE1_MASK 0xff
-#define MSM8976_BASE1_SHIFT 8
-
-#define MSM8976_S0_P1_MASK 0x3f00
-#define MSM8976_S1_P1_MASK 0x3f00000
-#define MSM8976_S2_P1_MASK 0x3f
-#define MSM8976_S3_P1_MASK 0x3f000
-#define MSM8976_S4_P1_MASK 0x3f00
-#define MSM8976_S5_P1_MASK 0x3f00000
-#define MSM8976_S6_P1_MASK 0x3f
-#define MSM8976_S7_P1_MASK 0x3f000
-#define MSM8976_S8_P1_MASK 0x1f8
-#define MSM8976_S9_P1_MASK 0x1f8000
-#define MSM8976_S10_P1_MASK 0xf8000000
-#define MSM8976_S10_P1_MASK_1 0x1
-
-#define MSM8976_S0_P2_MASK 0xfc000
-#define MSM8976_S1_P2_MASK 0xfc000000
-#define MSM8976_S2_P2_MASK 0xfc0
-#define MSM8976_S3_P2_MASK 0xfc0000
-#define MSM8976_S4_P2_MASK 0xfc000
-#define MSM8976_S5_P2_MASK 0xfc000000
-#define MSM8976_S6_P2_MASK 0xfc0
-#define MSM8976_S7_P2_MASK 0xfc0000
-#define MSM8976_S8_P2_MASK 0x7e00
-#define MSM8976_S9_P2_MASK 0x7e00000
-#define MSM8976_S10_P2_MASK 0x7e
-
-#define MSM8976_S0_P1_SHIFT 8
-#define MSM8976_S1_P1_SHIFT 20
-#define MSM8976_S2_P1_SHIFT 0
-#define MSM8976_S3_P1_SHIFT 12
-#define MSM8976_S4_P1_SHIFT 8
-#define MSM8976_S5_P1_SHIFT 20
-#define MSM8976_S6_P1_SHIFT 0
-#define MSM8976_S7_P1_SHIFT 12
-#define MSM8976_S8_P1_SHIFT 3
-#define MSM8976_S9_P1_SHIFT 15
-#define MSM8976_S10_P1_SHIFT 27
-#define MSM8976_S10_P1_SHIFT_1 0
-
-#define MSM8976_S0_P2_SHIFT 14
-#define MSM8976_S1_P2_SHIFT 26
-#define MSM8976_S2_P2_SHIFT 6
-#define MSM8976_S3_P2_SHIFT 18
-#define MSM8976_S4_P2_SHIFT 14
-#define MSM8976_S5_P2_SHIFT 26
-#define MSM8976_S6_P2_SHIFT 6
-#define MSM8976_S7_P2_SHIFT 18
-#define MSM8976_S8_P2_SHIFT 9
-#define MSM8976_S9_P2_SHIFT 21
-#define MSM8976_S10_P2_SHIFT 1
-
-#define MSM8976_CAL_SEL_MASK 0x3
-
/* eeprom layout data for qcs404/405 (v1) */
#define BASE0_MASK 0x000007f8
#define BASE1_MASK 0x0007f800
@@ -207,71 +150,6 @@ static int calibrate_v1(struct tsens_priv *priv)
return 0;
}
-static int calibrate_8976(struct tsens_priv *priv)
-{
- int base0 = 0, base1 = 0, i;
- u32 p1[11], p2[11];
- int mode = 0, tmp = 0;
- u32 *qfprom_cdata;
-
- qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
- if (IS_ERR(qfprom_cdata))
- return PTR_ERR(qfprom_cdata);
-
- mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK);
- dev_dbg(priv->dev, "calibration mode is %d\n", mode);
-
- switch (mode) {
- case TWO_PT_CALIB:
- base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT;
- p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT;
- p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT;
- p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT;
- p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT;
- p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT;
- p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT;
- p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT;
- p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT;
- p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT;
- p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT;
- p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT;
-
- for (i = 0; i < priv->num_sensors; i++)
- p2[i] = ((base1 + p2[i]) << 2);
- fallthrough;
- case ONE_PT_CALIB2:
- base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK;
- p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT;
- p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT;
- p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT;
- p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT;
- p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT;
- p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT;
- p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT;
- p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT;
- p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT;
- p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT;
- p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT;
- tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1;
- p1[10] |= tmp;
-
- for (i = 0; i < priv->num_sensors; i++)
- p1[i] = (((base0) + p1[i]) << 2);
- break;
- default:
- for (i = 0; i < priv->num_sensors; i++) {
- p1[i] = 500;
- p2[i] = 780;
- }
- break;
- }
-
- compute_intercept_slope(priv, p1, p2, mode);
- kfree(qfprom_cdata);
-
- return 0;
-}
-
/* v1.x: msm8956,8976,qcs404,405 */
static struct tsens_features tsens_v1_feat = {
@@ -367,7 +245,7 @@ struct tsens_plat_data data_tsens_v1 = {
static const struct tsens_ops ops_8956 = {
.init = init_8956,
- .calibrate = calibrate_8976,
+ .calibrate = tsens_calibrate_common,
.get_temp = get_temp_tsens_valid,
};
@@ -380,7 +258,7 @@ struct tsens_plat_data data_8956 = {
static const struct tsens_ops ops_8976 = {
.init = init_common,
- .calibrate = calibrate_8976,
+ .calibrate = tsens_calibrate_common,
.get_temp = get_temp_tsens_valid,
};
--
2.35.1
