The rpm_status_id field is a leftover from the non-SMD clocks. It is of
no use for the SMD-RPM clock driver and is always equal to zero. Drop it
completely.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/clk/qcom/clk-smd-rpm.c | 20 +++++++-------------
1 file changed, 7 insertions(+), 13 deletions(-)
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index e52e0e242294..828cae6769f9 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -25,13 +25,11 @@
#define QCOM_RPM_SMD_KEY_STATE 0x54415453
#define QCOM_RPM_SCALING_ENABLE_ID 0x2
-#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, stat_id, \
- key) \
+#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, key) \
static struct clk_smd_rpm _platform##_##_active; \
static struct clk_smd_rpm _platform##_##_name = { \
.rpm_res_type = (type), \
.rpm_clk_id = (r_id), \
- .rpm_status_id = (stat_id), \
.rpm_key = (key), \
.peer = &_platform##_##_active, \
.rate = INT_MAX, \
@@ -48,7 +46,6 @@
static struct clk_smd_rpm _platform##_##_active = { \
.rpm_res_type = (type), \
.rpm_clk_id = (r_id), \
- .rpm_status_id = (stat_id), \
.active_only = true, \
.rpm_key = (key), \
.peer = &_platform##_##_name, \
@@ -65,12 +62,11 @@
}
#define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, \
- stat_id, r, key) \
+ r, key) \
static struct clk_smd_rpm _platform##_##_active; \
static struct clk_smd_rpm _platform##_##_name = { \
.rpm_res_type = (type), \
.rpm_clk_id = (r_id), \
- .rpm_status_id = (stat_id), \
.rpm_key = (key), \
.branch = true, \
.peer = &_platform##_##_active, \
@@ -88,7 +84,6 @@
static struct clk_smd_rpm _platform##_##_active = { \
.rpm_res_type = (type), \
.rpm_clk_id = (r_id), \
- .rpm_status_id = (stat_id), \
.active_only = true, \
.rpm_key = (key), \
.branch = true, \
@@ -107,19 +102,19 @@
#define DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id) \
__DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \
- 0, QCOM_RPM_SMD_KEY_RATE)
+ QCOM_RPM_SMD_KEY_RATE)
#define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r) \
__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, \
- r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE)
+ r_id, r, QCOM_RPM_SMD_KEY_ENABLE)
#define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id) \
__DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \
- 0, QCOM_RPM_SMD_KEY_STATE)
+ QCOM_RPM_SMD_KEY_STATE)
#define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id, r) \
__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \
- QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, r, \
+ QCOM_SMD_RPM_CLK_BUF_A, r_id, r, \
QCOM_RPM_KEY_SOFTWARE_ENABLE)
#define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, \
@@ -128,7 +123,7 @@
r_id, r); \
__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name##_pin, \
_active##_pin, \
- QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, r, \
+ QCOM_SMD_RPM_CLK_BUF_A, r_id, r, \
QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
#define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
@@ -137,7 +132,6 @@ struct clk_smd_rpm {
const int rpm_res_type;
const int rpm_key;
const int rpm_clk_id;
- const int rpm_status_id;
const bool active_only;
bool enabled;
bool branch;
--
2.35.1
