Re: [PATCH v12 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 01, 2022 at 12:13:04PM +0800, Owen Yang wrote:
> Add DT for sc7280-herobrine-zombie
> 
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Signed-off-by: Owen Yang <ecs.taipeikernel@xxxxxxxxx>
> ---
> 
> Changes in v12:
> - Add "Reviewed-by" tag from Douglas.
> 
> Changes in v11:
> - Add comment "/* Set the PWM period to 200 microseconds (5kHz duty cycle) */" before "pwms = <&pm8350c_pwm 3 200000>;" in "sc7280-herobrine-zombie.dtsi", as requested by Douglas.

It seems you intended to do this, but you didn't. There is no comment in the
backlight node.

nit: There is not need to spell out the comment and the exact location in
the change log, just saying "added a comment for the adjustment of the PWM
period to the backlight node" would be enough/preferable. The comment can be
found in the diff below.

> 
> Changes in v10:
> - Remove wrong "Tested-by" tag in this patch, I misunderstood the "tested-by" tag usage, as requested by Krzysztof.
> - Remove patch 1 changes log in v8 log since it doesn't belongs to here, as requested by Krzysztof.
> - Fixed history log list.
> 
> Changes in v9:
> - Fixed version number (v7 and v8 were erroneously posted as v6).
> 
> Changes in v8:
> - None.
> 
> Changes in v7:
> - Add "Tested-by" in commit log.
> 
> Changes in v6:
> - Set the PWM period to 200 microseconds (5kHz duty cycle) to our display panel spec, and move to right place, as requested by Douglas and Matthias.
> - Drop post-power-on-delay-ms = <100>, as requested by Douglas.
> - Remove one of the lines after the line with "MOS_BLE_UART_RX" for matching amount of GPIO (174), as requested by Douglas.
> 
> Changes in v5:
> - Overwrite pm8350c_pwm_backlight setting in sc7280-herobrine-zombie.dtsi for chrome zombie.
> 
> Changes in v4:
> - Dropping the redundant 'DT binding for' as requested by Krzysztof.
> - Adding an empty line here before "/dts-v1/;" in "sc7280-herobrine-zombie-lte.dts", "sc7280-herobrine-zombie.dts" as requested by Matthias.
> - Deleteing "/dts-v1/;" in "sc7280-herobrine-zombie.dtsi" as requested by Matthias.
> 
> Changes in v3:
> - Droping changing file path in description. v3. as requested by Matthias.
> 
> Changes in v2:
> - Changing Patch order, binding patch first and dt file second, as requested by Douglas.
> - Adding "arm64: dts: qcom: sc7280:" in dt patch ${SUBJECT}, as requested by Douglas.
> - Adding "dt-bindings: arm: qcom:" in bind patch ${SUBJECT}, as requested by Douglas.
> - Adding '#include "sc7280-herobrine-wifi-sku.dtsi"' in sc7280-herobrine-zombie.dts, as requested by Douglas.
> - Adding "(newest rev)" for zombie entry description in qcom.yaml, as requested by Douglas.
> - Adding "post-power-on-delay-ms = <100>;" for trackpad in "sc7280-herobrine-zombie.dtsi".
> - Changing "vcc-supply" to "vdd-supply" for trackpad in "sc7280-herobrine-zombie.dtsi", as requested by Douglas.
> 
>  arch/arm64/boot/dts/qcom/Makefile             |   2 +
>  .../dts/qcom/sc7280-herobrine-zombie-lte.dts  |  16 +
>  .../boot/dts/qcom/sc7280-herobrine-zombie.dts |  16 +
>  .../dts/qcom/sc7280-herobrine-zombie.dtsi     | 311 ++++++++++++++++++
>  4 files changed, 345 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index afe496a93f94..7b0644a39062 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -114,6 +114,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-herobrine-r1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r0.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r1-lte.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
> new file mode 100644
> index 000000000000..c9fe64529555
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Zombie board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc7280-herobrine-zombie.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/ {
> +	model = "Google Zombie with LTE";
> +	compatible = "google,zombie-sku512", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
> new file mode 100644
> index 000000000000..0246c12b2f40
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Zombie board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc7280-herobrine-zombie.dtsi"
> +#include "sc7280-herobrine-wifi-sku.dtsi"
> +
> +/ {
> +	model = "Google Zombie";
> +	compatible = "google,zombie", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
> new file mode 100644
> index 000000000000..21ac55fd63aa
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
> @@ -0,0 +1,311 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Zombie board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine.dtsi"
> +#include "sc7280-herobrine-audio-rt5682.dtsi"
> +
> +/*
> + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
> + *
> + * Sort order matches the order in the parent files (parents before children).
> + */
> +
> +&pp3300_codec {
> +	status = "okay";
> +};
> +
> +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
> +
> +ap_tp_i2c: &i2c0 {
> +	clock-frequency = <400000>;
> +	status = "okay";
> +
> +	trackpad: trackpad@15 {
> +		compatible = "hid-over-i2c";
> +		reg = <0x15>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&tp_int_odl>;
> +
> +		interrupt-parent = <&tlmm>;
> +		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> +
> +		hid-descr-addr = <0x01>;
> +		vdd-supply = <&pp3300_z1>;
> +
> +		wakeup-source;
> +	};
> +};
> +
> +&ap_sar_sensor_i2c {
> +	status = "okay";
> +};
> +
> +&ap_sar_sensor0 {
> +	status = "okay";
> +};
> +
> +&ap_sar_sensor1 {
> +	status = "okay";
> +};
> +
> +&mdss_edp {
> +	status = "okay";
> +};
> +
> +&mdss_edp_phy {
> +	status = "okay";
> +};
> +
> +/* For nvme */
> +&pcie1 {
> +	status = "okay";
> +};
> +
> +/* For nvme */
> +&pcie1_phy {
> +	status = "okay";
> +};
> +
> +&pm8350c_pwm_backlight{
> +	pwms = <&pm8350c_pwm 3 200000>;
> +};
> +
> +&pwmleds {
> +	status = "okay";
> +};
> +
> +/* For eMMC */
> +&sdhc_1 {
> +	status = "okay";
> +};
> +
> +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
> +
> +&ts_rst_conn {
> +	bias-disable;
> +};
> +
> +/* PINCTRL - BOARD-SPECIFIC */
> +
> +/*
> + * Methodology for gpio-line-names:
> + * - If a pin goes to herobrine board and is named it gets that name.
> + * - If a pin goes to herobrine board and is not named, it gets no name.
> + * - If a pin is totally internal to Qcard then it gets Qcard name.
> + * - If a pin is not hooked up on Qcard, it gets no name.
> + */
> +
> +&pm8350c_gpios {
> +	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
> +			  "AP_SUSPEND",
> +			  "PM8008_1_RST_N",
> +			  "",
> +			  "",
> +			  "",
> +			  "PMIC_EDP_BL_EN",
> +			  "PMIC_EDP_BL_PWM",
> +			  "";
> +};
> +
> +&tlmm {
> +	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
> +			  "AP_TP_I2C_SCL",
> +			  "SSD_RST_L",
> +			  "PE_WAKE_ODL",
> +			  "AP_SAR_SDA",
> +			  "AP_SAR_SCL",
> +			  "PRB_SC_GPIO_6",
> +			  "TP_INT_ODL",
> +			  "HP_I2C_SDA",
> +			  "HP_I2C_SCL",
> +
> +			  "GNSS_L1_EN",			/* 10 */
> +			  "GNSS_L5_EN",
> +			  "SPI_AP_MOSI",
> +			  "SPI_AP_MISO",
> +			  "SPI_AP_CLK",
> +			  "SPI_AP_CS0_L",
> +			  /*
> +			   * AP_FLASH_WP is crossystem ABI. Schematics
> +			   * call it BIOS_FLASH_WP_OD.
> +			   */
> +			  "AP_FLASH_WP",
> +			  "",
> +			  "AP_EC_INT_L",
> +			  "",
> +
> +			  "UF_CAM_RST_L",		/* 20 */
> +			  "WF_CAM_RST_L",
> +			  "UART_AP_TX_DBG_RX",
> +			  "UART_DBG_TX_AP_RX",
> +			  "",
> +			  "PM8008_IRQ_1",
> +			  "HOST2WLAN_SOL",
> +			  "WLAN2HOST_SOL",
> +			  "MOS_BT_UART_CTS",
> +			  "MOS_BT_UART_RFR",
> +
> +			  "MOS_BT_UART_TX",		/* 30 */
> +			  "MOS_BT_UART_RX",
> +			  "PRB_SC_GPIO_32",
> +			  "HUB_RST_L",
> +			  "",
> +			  "",
> +			  "AP_SPI_FP_MISO",
> +			  "AP_SPI_FP_MOSI",
> +			  "AP_SPI_FP_CLK",
> +			  "AP_SPI_FP_CS_L",
> +
> +			  "AP_EC_SPI_MISO",		/* 40 */
> +			  "AP_EC_SPI_MOSI",
> +			  "AP_EC_SPI_CLK",
> +			  "AP_EC_SPI_CS_L",
> +			  "LCM_RST_L",
> +			  "EARLY_EUD_N",
> +			  "",
> +			  "DP_HOT_PLUG_DET",
> +			  "IO_BRD_MLB_ID0",
> +			  "IO_BRD_MLB_ID1",
> +
> +			  "IO_BRD_MLB_ID2",		/* 50 */
> +			  "SSD_EN",
> +			  "TS_I2C_SDA_CONN",
> +			  "TS_I2C_CLK_CONN",
> +			  "TS_RST_CONN",
> +			  "TS_INT_CONN",
> +			  "AP_I2C_TPM_SDA",
> +			  "AP_I2C_TPM_SCL",
> +			  "PRB_SC_GPIO_58",
> +			  "PRB_SC_GPIO_59",
> +
> +			  "EDP_HOT_PLUG_DET_N",		/* 60 */
> +			  "FP_TO_AP_IRQ_L",
> +			  "",
> +			  "AMP_EN",
> +			  "CAM0_MCLK_GPIO_64",
> +			  "CAM1_MCLK_GPIO_65",
> +			  "WF_CAM_MCLK",
> +			  "PRB_SC_GPIO_67",
> +			  "FPMCU_BOOT0",
> +			  "UF_CAM_SDA",
> +
> +			  "UF_CAM_SCL",			/* 70 */
> +			  "",
> +			  "",
> +			  "WF_CAM_SDA",
> +			  "WF_CAM_SCL",
> +			  "",
> +			  "",
> +			  "EN_FP_RAILS",
> +			  "FP_RST_L",
> +			  "PCIE1_CLKREQ_ODL",
> +
> +			  "EN_PP3300_DX_EDP",		/* 80 */
> +			  "US_EURO_HS_SEL",
> +			  "FORCED_USB_BOOT",
> +			  "WCD_RESET_N",
> +			  "MOS_WLAN_EN",
> +			  "MOS_BT_EN",
> +			  "MOS_SW_CTRL",
> +			  "MOS_PCIE0_RST",
> +			  "MOS_PCIE0_CLKREQ_N",
> +			  "MOS_PCIE0_WAKE_N",
> +
> +			  "MOS_LAA_AS_EN",		/* 90 */
> +			  "SD_CD_ODL",
> +			  "",
> +			  "",
> +			  "MOS_BT_WLAN_SLIMBUS_CLK",
> +			  "MOS_BT_WLAN_SLIMBUS_DAT0",
> +			  "HP_MCLK",
> +			  "HP_BCLK",
> +			  "HP_DOUT",
> +			  "HP_DIN",
> +
> +			  "HP_LRCLK",			/* 100 */
> +			  "HP_IRQ",
> +			  "",
> +			  "",
> +			  "GSC_AP_INT_ODL",
> +			  "EN_PP3300_CODEC",
> +			  "AMP_BCLK",
> +			  "AMP_DIN",
> +			  "AMP_LRCLK",
> +			  "UIM1_DATA_GPIO_109",
> +
> +			  "UIM1_CLK_GPIO_110",		/* 110 */
> +			  "UIM1_RESET_GPIO_111",
> +			  "PRB_SC_GPIO_112",
> +			  "UIM0_DATA",
> +			  "UIM0_CLK",
> +			  "UIM0_RST",
> +			  "UIM0_PRESENT_ODL",
> +			  "SDM_RFFE0_CLK",
> +			  "SDM_RFFE0_DATA",
> +			  "WF_CAM_EN",
> +
> +			  "FASTBOOT_SEL_0",		/* 120 */
> +			  "SC_GPIO_121",
> +			  "FASTBOOT_SEL_1",
> +			  "SC_GPIO_123",
> +			  "FASTBOOT_SEL_2",
> +			  "SM_RFFE4_CLK_GRFC_8",
> +			  "SM_RFFE4_DATA_GRFC_9",
> +			  "WLAN_COEX_UART1_RX",
> +			  "WLAN_COEX_UART1_TX",
> +			  "PRB_SC_GPIO_129",
> +
> +			  "LCM_ID0",			/* 130 */
> +			  "LCM_ID1",
> +			  "",
> +			  "SDR_QLINK_REQ",
> +			  "SDR_QLINK_EN",
> +			  "QLINK0_WMSS_RESET_N",
> +			  "SMR526_QLINK1_REQ",
> +			  "SMR526_QLINK1_EN",
> +			  "SMR526_QLINK1_WMSS_RESET_N",
> +			  "PRB_SC_GPIO_139",
> +
> +			  "SAR1_IRQ_ODL",		/* 140 */
> +			  "SAR0_IRQ_ODL",
> +			  "PRB_SC_GPIO_142",
> +			  "",
> +			  "WCD_SWR_TX_CLK",
> +			  "WCD_SWR_TX_DATA0",
> +			  "WCD_SWR_TX_DATA1",
> +			  "WCD_SWR_RX_CLK",
> +			  "WCD_SWR_RX_DATA0",
> +			  "WCD_SWR_RX_DATA1",
> +
> +			  "DMIC01_CLK",			/* 150 */
> +			  "DMIC01_DATA",
> +			  "DMIC23_CLK",
> +			  "DMIC23_DATA",
> +			  "",
> +			  "",
> +			  "EC_IN_RW_ODL",
> +			  "HUB_EN",
> +			  "WCD_SWR_TX_DATA2",
> +			  "",
> +
> +			  "",				/* 160 */
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +
> +			  "",				/* 170 */
> +			  "MOS_BLE_UART_TX",
> +			  "MOS_BLE_UART_RX",
> +			  "",
> +			  "";
> +};
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux