Add compatible string for PM8550 used in SM8550 boards.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
Changes since v1:
* changed subject line according to Krzysztof's suggestion
* dropped unrelated changes reported by Krzysztof
.../regulator/qcom,rpmh-regulator.yaml | 26 +++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 7ff51b558702..297a75069f60 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -47,6 +47,7 @@ description: |
For PM8350, smps1 - smps12, ldo1 - ldo10
For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
For PM8450, smps1 - smps6, ldo1 - ldo4
+ For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2
For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
For PMI8998, bob
For PMR735A, smps1 - smps3, ldo1 - ldo7
@@ -70,6 +71,9 @@ properties:
- qcom,pm8350-rpmh-regulators
- qcom,pm8350c-rpmh-regulators
- qcom,pm8450-rpmh-regulators
+ - qcom,pm8550-rpmh-regulators
+ - qcom,pm8550ve-rpmh-regulators
+ - qcom,pm8550vs-rpmh-regulators
- qcom,pm8998-rpmh-regulators
- qcom,pmg1110-rpmh-regulators
- qcom,pmi8998-rpmh-regulators
@@ -83,7 +87,7 @@ properties:
RPMh resource name suffix used for the regulators found
on this PMIC.
$ref: /schemas/types.yaml#/definitions/string
- enum: [a, b, c, d, e, f, h, k]
+ enum: [a, b, c, d, e, f, g, h, k]
qcom,always-wait-for-ack:
description: |
@@ -107,7 +111,7 @@ properties:
regulator-allow-set-load: ["regulator-allowed-modes"]
patternProperties:
- "^(smps|ldo|lvs)[0-9]+$":
+ "^(smps|ldo|lvs|bob)[0-9]+$":
type: object
$ref: "regulator.yaml#"
description: smps/ldo regulator nodes(s).
@@ -299,6 +303,24 @@ allOf:
"^vdd-l[1-4]-supply$": true
"^vdd-s[1-6]-supply$": true
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,pm8550-rpmh-regulators
+ - qcom,pm8550ve-rpmh-regulators
+ - qcom,pm8550vs-rpmh-regulators
+ then:
+ properties:
+ vdd-l2-l13-l14-supply: true
+ vdd-l5-l16-supply: true
+ vdd-l6-l7-supply: true
+ vdd-l8-l9-supply: true
+ patternProperties:
+ "^vdd-l([1-4]|1[0-7])-supply$": true
+ "^vdd-s[1-6]-supply$": true
+ "^vdd-bob[1-2]-supply$": true
+
- if:
properties:
compatible:
--
2.34.1
