From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Drop all unused symbols from the driver. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- drivers/tty/serial/qcom_geni_serial.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 9f2212e7b5ec..7af5df6833c7 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -42,20 +42,11 @@ #define UART_TX_PAR_EN BIT(0) #define UART_CTS_MASK BIT(1) -/* SE_UART_TX_WORD_LEN */ -#define TX_WORD_LEN_MSK GENMASK(9, 0) - /* SE_UART_TX_STOP_BIT_LEN */ -#define TX_STOP_BIT_LEN_MSK GENMASK(23, 0) #define TX_STOP_BIT_LEN_1 0 -#define TX_STOP_BIT_LEN_1_5 1 #define TX_STOP_BIT_LEN_2 2 -/* SE_UART_TX_TRANS_LEN */ -#define TX_TRANS_LEN_MSK GENMASK(23, 0) - /* SE_UART_RX_TRANS_CFG */ -#define UART_RX_INS_STATUS_BIT BIT(2) #define UART_RX_PAR_EN BIT(3) /* SE_UART_RX_WORD_LEN */ @@ -66,12 +57,9 @@ /* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */ #define PAR_CALC_EN BIT(0) -#define PAR_MODE_MSK GENMASK(2, 1) -#define PAR_MODE_SHFT 1 #define PAR_EVEN 0x00 #define PAR_ODD 0x01 #define PAR_SPACE 0x10 -#define PAR_MARK 0x11 /* SE_UART_MANUAL_RFR register fields */ #define UART_MANUAL_RFR_EN BIT(31) @@ -80,11 +68,8 @@ /* UART M_CMD OP codes */ #define UART_START_TX 0x1 -#define UART_START_BREAK 0x4 -#define UART_STOP_BREAK 0x5 /* UART S_CMD OP codes */ #define UART_START_READ 0x1 -#define UART_PARAM 0x1 #define UART_OVERSAMPLING 32 #define STALE_TIMEOUT 16 -- 2.37.2
