[PATCH v4 5/5] arm64: dts: qcom: msm8916-gplus-fl8005a: Add flash LED

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



FL8005A uses SGM3140 Flash LED driver. Add it to the device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@xxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 .../boot/dts/qcom/msm8916-gplus-fl8005a.dts   | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
index 2cac99e3e52c..b28d7d0f1ed5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -21,6 +21,21 @@ chosen {
 		stdout-path = "serial0";
 	};
 
+	flash-led-controller {
+		compatible = "sgmicro,sgm3140";
+		enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
+		flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_flash_default>;
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -239,6 +254,14 @@ l18 {
 };
 
 &msmgpio {
+	camera_flash_default: camera-flash-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
-- 
2.30.2






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux