[PATCH v2 5/5] arm64: dts: qcom: sm8450-hdk: Enable HDMI Display

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

From: Vinod Koul <vkoul@xxxxxxxxxx>

Add the HDMI display nodes and link it to DSI.

Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 36 +++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index 6b6dcd0e0052..709cddaac781 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -20,6 +20,17 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
 	lt9611_1v2: lt9611-vdd12-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "LT9611_1V2";
@@ -393,6 +404,26 @@ lt9611_codec: hdmi-bridge@2b {
 		pinctrl-names = "default";
 		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
 
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
 	};
 };
 
@@ -405,6 +436,11 @@ &mdss_dsi0 {
 	status = "okay";
 };
 
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
 &mdss_dsi0_phy {
 	vdds-supply = <&vreg_l5b_0p88>;
 	status = "okay";
-- 
2.35.1