Re: [PATCH v4 3/3] interconnect: qcom: Add QDU1000/QRU1000 interconnect driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 21/11/2022 à 18:55, Melody Olvera a écrit :


On 11/20/2022 6:19 AM, Christophe JAILLET wrote:
Le 18/11/2022 à 19:22, Melody Olvera a écrit :
Add interconnect provider driver for Qualcomm QDU1000 and QRU1000
platforms.

Signed-off-by: Melody Olvera <quic_molvera-jfJNa2p1gH1BDgjK7y7TUQ@xxxxxxxxxxxxxxxx>
---
   drivers/interconnect/qcom/Kconfig   |    9 +
   drivers/interconnect/qcom/Makefile  |    2 +
   drivers/interconnect/qcom/qdu1000.c | 1079 +++++++++++++++++++++++++++
   drivers/interconnect/qcom/qdu1000.h |   95 +++
   4 files changed, 1185 insertions(+)
   create mode 100644 drivers/interconnect/qcom/qdu1000.c
   create mode 100644 drivers/interconnect/qcom/qdu1000.h


[...]

+static int qnoc_probe(struct platform_device *pdev)
+{
+    int ret;
+
+    ret = qcom_icc_rpmh_probe(pdev);
+    if (ret)
+        dev_err(&pdev->dev, "failed to register ICC provider\n");
+
+    return ret;
+}
+
+static int qnoc_remove(struct platform_device *pdev)
+{
+    struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
+
+    icc_nodes_remove(&qp->provider);
+    icc_provider_del(&qp->provider);

qcom_icc_rpmh_remove()?

(more future proof, less verbose and more consistent with qcom_icc_rpmh_probe() in the probe)

CJ

Good call. Does it make sense to just set the .probe and .remove functions as
qcom_icc_rpmh_probe() and qcom_icc_rpmh_remove(), respectively? Probe function
is just reporting if qcom_icc_rpmh_probe fails.

I guess it is fine to remove qcom_icc_rpmh_probe() and qcom_icc_rpmh_remove().

I've already seen such pattern in some other drivers.


But this is just the point of view of someone who never wrote a driver himself :)

So let see if a maintainer gives his POV.

CJ


Thanks,
Melody

+
+    return 0;
+}
+
+static const struct of_device_id qnoc_of_match[] = {
+    { .compatible = "qcom,qdu1000-clk-virt",
+      .data = &qdu1000_clk_virt
+    },
+    { .compatible = "qcom,qdu1000-gem-noc",
+      .data = &qdu1000_gem_noc
+    },
+    { .compatible = "qcom,qdu1000-mc-virt",
+      .data = &qdu1000_mc_virt
+    },
+    { .compatible = "qcom,qdu1000-system-noc",
+      .data = &qdu1000_system_noc
+    },
+    { }
+};
+MODULE_DEVICE_TABLE(of, qnoc_of_match);
+
+static struct platform_driver qnoc_driver = {
+    .probe = qnoc_probe,
+    .remove = qnoc_remove,
+    .driver = {
+        .name = "qnoc-qdu1000",
+        .of_match_table = qnoc_of_match,
+    },
+};

[...]







[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux