From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
The reset line is active low for the Goodix touchscreen controller so
let's fix the polarity in the Device Tree node.
Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
---
Changes in v2:
- removed Qcom SC7180 Trogdor-based devices changes as they are not using this Goodix driver,
arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index 429ba57e20f71..8f738cade2652 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -249,7 +249,7 @@ touchscreen@14 {
reg = <0x14>;
interrupt-parent = <&tlmm>;
interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
AVDD28-supply = <&vreg_l28_3p0>;
VDDIO-supply = <&ts_vio_vreg>;
pinctrl-names = "active";
--
b4 0.10.1
