Re: [PATCH 10/15] tty: serial: qcom-geni-serial: use of_device_id data

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 18/11/2022 13:25, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Instead of checking the device compatible in probe(), assign the
> device-specific data to struct of_device_id. We'll use it later when
> providing SE DMA support.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>   drivers/tty/serial/qcom_geni_serial.c | 46 ++++++++++++++++++++-------
>   1 file changed, 34 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index 72d0e7b91080..6a9f3f937f29 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -95,6 +95,11 @@
>   /* We always configure 4 bytes per FIFO word */
>   #define BYTES_PER_FIFO_WORD		4
>   
> +struct qcom_geni_device_data {
> +	bool console;
> +	void (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
> +};
> +
>   struct qcom_geni_private_data {
>   	/* NOTE: earlycon port will have NULL here */
>   	struct uart_driver *drv;
> @@ -114,7 +119,6 @@ struct qcom_geni_serial_port {
>   	u32 tx_fifo_width;
>   	u32 rx_fifo_depth;
>   	bool setup;
> -	void (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
>   	unsigned int baud;
>   	void *rx_fifo;
>   	u32 loopback;
> @@ -126,6 +130,7 @@ struct qcom_geni_serial_port {
>   	bool cts_rts_swap;
>   
>   	struct qcom_geni_private_data private_data;
> +	const struct qcom_geni_device_data *dev_data;
>   };
>   
>   static const struct uart_ops qcom_geni_console_pops;
> @@ -637,7 +642,7 @@ static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop)
>   		total_bytes += last_word_byte_cnt;
>   	else
>   		total_bytes += BYTES_PER_FIFO_WORD;
> -	port->handle_rx(uport, total_bytes, drop);
> +	port->dev_data->handle_rx(uport, total_bytes, drop);
>   }
>   
>   static void qcom_geni_serial_stop_rx(struct uart_port *uport)
> @@ -1348,13 +1353,14 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
>   	struct uart_port *uport;
>   	struct resource *res;
>   	int irq;
> -	bool console = false;
>   	struct uart_driver *drv;
> +	const struct qcom_geni_device_data *data;
>   
> -	if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart"))
> -		console = true;
> +	data = of_device_get_match_data(&pdev->dev);
> +	if (!data)
> +		return -EINVAL;
>   
> -	if (console) {
> +	if (data->console) {
>   		drv = &qcom_geni_console_driver;
>   		line = of_alias_get_id(pdev->dev.of_node, "serial");
>   	} else {
> @@ -1364,7 +1370,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
>   			line = of_alias_get_id(pdev->dev.of_node, "hsuart");
>   	}
>   
> -	port = get_port_from_line(line, console);
> +	port = get_port_from_line(line, data->console);
>   	if (IS_ERR(port)) {
>   		dev_err(&pdev->dev, "Invalid line %d\n", line);
>   		return PTR_ERR(port);
> @@ -1376,6 +1382,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
>   		return -ENODEV;
>   
>   	uport->dev = &pdev->dev;
> +	port->dev_data = data;
>   	port->se.dev = &pdev->dev;
>   	port->se.wrapper = dev_get_drvdata(pdev->dev.parent);
>   	port->se.clk = devm_clk_get(&pdev->dev, "se");
> @@ -1394,7 +1401,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
>   	port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS;
>   	port->tx_fifo_width = DEF_FIFO_WIDTH_BITS;
>   
> -	if (!console) {
> +	if (!data->console) {
>   		port->rx_fifo = devm_kcalloc(uport->dev,
>   			port->rx_fifo_depth, sizeof(u32), GFP_KERNEL);
>   		if (!port->rx_fifo)
> @@ -1424,7 +1431,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
>   	uport->irq = irq;
>   	uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_QCOM_GENI_CONSOLE);
>   
> -	if (!console)
> +	if (!data->console)
>   		port->wakeup_irq = platform_get_irq_optional(pdev, 1);
>   
>   	if (of_property_read_bool(pdev->dev.of_node, "rx-tx-swap"))
> @@ -1446,7 +1453,6 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
>   	port->private_data.drv = drv;
>   	uport->private_data = &port->private_data;
>   	platform_set_drvdata(pdev, port);
> -	port->handle_rx = console ? handle_rx_console : handle_rx_uart;
>   
>   	ret = uart_add_one_port(drv, uport);
>   	if (ret)
> @@ -1526,14 +1532,30 @@ static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
>   	return ret;
>   }
>   
> +static const struct qcom_geni_device_data qcom_geni_console_data = {
> +	.console = true,
> +	.handle_rx = handle_rx_console,
> +};
> +
> +static const struct qcom_geni_device_data qcom_geni_uart_data = {
> +	.console = false,
> +	.handle_rx = handle_rx_uart,
> +};
> +
>   static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
>   	SET_SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend,
>   					qcom_geni_serial_sys_resume)
>   };
>   
>   static const struct of_device_id qcom_geni_serial_match_table[] = {
> -	{ .compatible = "qcom,geni-debug-uart", },
> -	{ .compatible = "qcom,geni-uart", },
> +	{
> +		.compatible = "qcom,geni-debug-uart",
> +		.data = &qcom_geni_console_data,
> +	},
> +	{
> +		.compatible = "qcom,geni-uart",
> +		.data = &qcom_geni_uart_data,
> +	},
>   	{}
>   };
>   MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table);