Split common part of Qualcomm SoC Peripheral Image Loader / Peripheral
Authentication Service bindings into a re-usable schema file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Changes since v1:
1. Keep resets, reset-names, qcom,qmp and qcom,halt-regs in qcom,adsp,
because they are not shared with most of PAS bindings.
---
.../bindings/remoteproc/qcom,adsp.yaml | 81 +---------------
.../bindings/remoteproc/qcom,pas-common.yaml | 97 +++++++++++++++++++
2 files changed, 99 insertions(+), 79 deletions(-)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index db9e0f0c2bea..bd4082411bf5 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -59,37 +59,6 @@ properties:
reg:
maxItems: 1
- clocks:
- minItems: 1
- maxItems: 8
-
- clock-names:
- minItems: 1
- maxItems: 8
-
- interconnects:
- maxItems: 1
-
- interrupts:
- minItems: 5
- items:
- - description: Watchdog interrupt
- - description: Fatal interrupt
- - description: Ready interrupt
- - description: Handover interrupt
- - description: Stop acknowledge interrupt
- - description: Shutdown acknowledge interrupt
-
- interrupt-names:
- minItems: 5
- items:
- - const: wdog
- - const: fatal
- - const: ready
- - const: handover
- - const: stop-ack
- - const: shutdown-ack
-
resets:
minItems: 1
maxItems: 3
@@ -104,37 +73,10 @@ properties:
px-supply:
description: Phandle to the PX regulator
- power-domains:
- minItems: 1
- maxItems: 3
-
- power-domain-names:
- minItems: 1
- maxItems: 3
-
- firmware-name:
- $ref: /schemas/types.yaml#/definitions/string
- description: Firmware name for the Hexagon core
-
- memory-region:
- maxItems: 1
- description: Reference to the reserved-memory for the Hexagon core
-
qcom,qmp:
$ref: /schemas/types.yaml#/definitions/phandle
description: Reference to the AOSS side-channel message RAM.
- qcom,smem-states:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- description: States used by the AP to signal the Hexagon core
- items:
- - description: Stop the modem
-
- qcom,smem-state-names:
- description: The names of the state bits used for SMP2P output
- items:
- - const: stop
-
qcom,halt-regs:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
@@ -147,32 +89,13 @@ properties:
Phandle reference to a syscon representing TCSR followed by the
three offsets within syscon for q6, modem and nc halt registers.
- smd-edge:
- $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
- description:
- Qualcomm Shared Memory subnode which represents communication edge,
- channels and devices related to the ADSP.
- unevaluatedProperties: false
-
- glink-edge:
- $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
- description:
- Qualcomm G-Link subnode which represents communication edge, channels
- and devices related to the ADSP.
-
required:
- compatible
- - clocks
- - clock-names
- - interrupts
- - interrupt-names
- - memory-region
- - qcom,smem-states
- - qcom,smem-state-names
-additionalProperties: false
+unevaluatedProperties: false
allOf:
+ - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
new file mode 100644
index 000000000000..9729ba79f28f
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,pas-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Peripheral Authentication Service shared parts
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
+
+description:
+ Shared parts of Qualcomm Peripheral Authentication Service.
+
+properties:
+ clocks:
+ minItems: 1
+ maxItems: 8
+
+ clock-names:
+ minItems: 1
+ maxItems: 8
+
+ interconnects:
+ maxItems: 1
+
+ interrupts:
+ minItems: 5
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+ - description: Shutdown acknowledge interrupt
+
+ interrupt-names:
+ minItems: 5
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+ - const: shutdown-ack
+
+ power-domains:
+ minItems: 1
+ maxItems: 3
+
+ power-domain-names:
+ minItems: 1
+ maxItems: 3
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Firmware name for the Hexagon core
+
+ memory-region:
+ maxItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: stop
+
+ smd-edge:
+ $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+ description:
+ Qualcomm Shared Memory subnode which represents communication edge,
+ channels and devices related to the ADSP.
+ unevaluatedProperties: false
+
+ glink-edge:
+ $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+ description:
+ Qualcomm G-Link subnode which represents communication edge, channels
+ and devices related to the ADSP.
+ unevaluatedProperties: false
+
+required:
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - memory-region
+ - qcom,smem-states
+ - qcom,smem-state-names
+
+additionalProperties: true
--
2.34.1
