[PATCH v6 4/7] arm64: dts: qcom: sdm845-db845c: Use okay not ok, disabled not disable for status

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use preferred "ok" not "okay".
Use preferred status "disabled" instead of "disable".

There's no functional change here so no Fixes has been applied.

Reported-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 8a98f3e86b41d..be946f71666bc 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1182,7 +1182,7 @@ &camss {
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l26a_1p2>;
 
-	status = "ok";
+	status = "okay";
 
 	ports {
 		port@0 {
@@ -1220,8 +1220,6 @@ camera@10 {
 		avdd-supply = <&cam0_avdd_2v8>;
 		dvdd-supply = <&cam0_dvdd_1v2>;
 
-		status = "ok";
-
 		port {
 			ov8856_ep: endpoint {
 				link-frequencies = /bits/ 64
@@ -1261,7 +1259,7 @@ camera@60 {
 		vdddo-supply = <&vreg_lvs1a_1p8>;
 		vdda-supply = <&cam3_avdd_2v8>;
 
-		status = "disable";
+		status = "disabled";
 
 		port {
 			ov7251_ep: endpoint {
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux