On 16/11/2022 13:35, Abel Vesa wrote: > Add the SM8550 platform to the binding. Subject: Drop redundant, second "binding" > > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> > --- > .../devicetree/bindings/pci/qcom,pcie.yaml | 96 +++++++++++++++++++ > 1 file changed, 96 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml > index 54f07852d279..efa01a8411c4 100644 > --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml > @@ -34,6 +34,8 @@ properties: > - qcom,pcie-sm8250 > - qcom,pcie-sm8450-pcie0 > - qcom,pcie-sm8450-pcie1 > + - qcom,pcie-sm8550-pcie0 > + - qcom,pcie-sm8550-pcie1 I am not sure what's the benefit of encoding arbitrary IDs to compatible just to differentiate by clocks. The devices are basically the same, so compatible should be the same. > - qcom,pcie-ipq6018 > > reg: > @@ -92,6 +94,10 @@ properties: > power-domains: > maxItems: 1 > > + enable-gpios: > + description: GPIO controlled connection to ENABLE# signal > + maxItems: 1 Does not look like used property... > + > perst-gpios: > description: GPIO controlled connection to PERST# signal > maxItems: 1 > @@ -187,6 +193,8 @@ allOf: > - qcom,pcie-sm8250 > - qcom,pcie-sm8450-pcie0 > - qcom,pcie-sm8450-pcie1 > + - qcom,pcie-sm8550-pcie0 > + - qcom,pcie-sm8550-pcie1 > then: > properties: > reg: > @@ -601,6 +609,92 @@ allOf: > items: > - const: pci # PCIe core reset > > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,pcie-sm8550-pcie0 > + then: > + properties: > + clocks: > + minItems: 11 > + maxItems: 11 > + clock-names: > + items: > + - const: pipe # PIPE clock > + - const: pipe_mux # PIPE MUX > + - const: phy_pipe # PIPE output clock > + - const: ref # REFERENCE clock > + - const: aux # Auxiliary clock > + - const: cfg # Configuration clock > + - const: bus_master # Master AXI clock > + - const: bus_slave # Slave AXI clock > + - const: slave_q2a # Slave Q2A clock > + - const: ddrss_sf_tbu # PCIe SF TBU clock > + - const: aggre0 # Aggre NoC PCIe0 AXI clock > + interconnects: > + maxItems: 1 > + interconnect-names: > + const: icc_path Keep existing pattern of allOf:if:then or change entire file to a different style. Best regards, Krzysztof
