[PATCH 1/2] ufs: host: ufs-qcom: Clear qunipro_g4_sel for HW version major 5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On SM8550, depending on the Qunipro, we can run with G5 or G4.
For now, when the major version is 5 or above, we go with G5.
Therefore, we need to specifically tell UFS HC that.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
 drivers/ufs/host/ufs-qcom.c | 4 ++++
 drivers/ufs/host/ufs-qcom.h | 2 ++
 2 files changed, 6 insertions(+)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index ca60a5b0292b..72334aefe81c 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -227,6 +227,10 @@ static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
 	ufshcd_rmwl(host->hba, QUNIPRO_SEL,
 		   ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0,
 		   REG_UFS_CFG1);
+
+	if (host->hw_ver.major == 0x05)
+		ufshcd_rmwl(host->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0);
+
 	/* make sure above configuration is applied before we return */
 	mb();
 }
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 751ded3e3531..10621055bf7f 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -36,6 +36,7 @@ enum {
 	/* On older UFS revisions, this register is called "RETRY_TIMER_REG" */
 	REG_UFS_PARAM0                      = 0xD0,
 	REG_UFS_PA_LINK_STARTUP_TIMER       = 0xD8,
+	REG_UFS_CFG0                        = 0xD8,
 	REG_UFS_CFG1                        = 0xDC,
 	REG_UFS_CFG2                        = 0xE0,
 	REG_UFS_HW_VERSION                  = 0xE4,
@@ -75,6 +76,7 @@ enum {
 
 /* bit definitions for REG_UFS_CFG1 register */
 #define QUNIPRO_SEL		BIT(0)
+#define QUNIPRO_G4_SEL		BIT(5)
 #define UFS_PHY_SOFT_RESET	BIT(1)
 #define UTP_DBG_RAMS_EN		BIT(17)
 #define TEST_BUS_EN		BIT(18)
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux