Re: [PATCH 3/3] arm64: dts: qcom: sm8550-mtp: enable adsp, cdsp & mdss

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 16/11/2022 11:43, Neil Armstrong wrote:
Add the aDSP, cDSP and MPSS firmware and "Devicetree" firmware paths
for the SM8550 MTP platform.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 18 ++++++++++++++++++
  1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index d4c8d5b2497e..be06e25409c3 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -376,6 +376,24 @@ &qupv3_id_0 {
  	status = "okay";
  };
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8550/adsp.mbn";
+	qcom,dtb-firmware-name = "qcom/sm8550/adsp_dtb.mbn";
status should go last. I missed that in the review of the patchset introducing this DTS, please fix it over there as well.

Konrad
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8550/cdsp.mbn";
+	qcom,dtb-firmware-name = "qcom/sm8550/cdsp_dtb.mbn";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8550/modem.mbn";
+	qcom,dtb-firmware-name = "qcom/sm8550/modem_dtb.mbn";
+};
+
  &sdhc_2 {
  	status = "okay";



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux