Re: [PATCH 7/9] clk: qcom: rpmh: Add support for SM8550 rpmh clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 16/11/2022 11:47, Abel Vesa wrote:
Adds the RPMH clocks present in SM8550 SoC.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
  drivers/clk/qcom/clk-rpmh.c | 110 +++++++++++++++++++++++++++++-------
  1 file changed, 90 insertions(+), 20 deletions(-)

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 1da45a6e2f29..63975490ab54 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -579,6 +579,73 @@ static const struct clk_rpmh_desc clk_rpmh_sm8450 = {
  	.num_clks = ARRAY_SIZE(sm8450_rpmh_clocks),
  };
+#define DEFINE_CLK_RPMH_FIXED(_platform, _name, _name_active, \
+				  _parent_name, _name_active_parent,	\
+				  _div)					\
+	static struct clk_fixed_factor _platform##_##_name = {		\
+		.mult = 1,						\
+		.div = _div,						\
+		.hw.init = &(struct clk_init_data){			\
+			.ops = &clk_fixed_factor_ops,			\
+			.name = #_name,					\
+			.parent_data =  &(const struct clk_parent_data){ \
+					.fw_name = #_parent_name,	\
+					.name = #_parent_name,		\
No need to introduce .name if we do DT properly from the get-go, I think


Konrad
+			},						\
+			.num_parents = 1,				\
+		},							\
+	};								\
+	static struct clk_fixed_factor _platform##_##_name_active = {	\
+		.mult = 1,						\
+		.div = _div,						\
+		.hw.init = &(struct clk_init_data){			\
+			.ops = &clk_fixed_factor_ops,			\
+			.name = #_name_active,				\
+			.parent_data =  &(const struct clk_parent_data){ \
+					.fw_name = #_name_active_parent,\
+					.name = #_name_active_parent,	\
+			},						\
+			.num_parents = 1,				\
+		},							\
+	}
+
+DEFINE_CLK_RPMH_ARC(sm8550, xo_pad, xo_pad_ao, "xo.lvl", 0x03, 2);
+DEFINE_CLK_RPMH_FIXED(sm8550, bi_tcxo, bi_tcxo_ao, xo_pad, xo_pad_ao, 2);
+DEFINE_CLK_RPMH_VRM(sm8550, rf_clk1, rf_clk1_ao, "clka1", 1);
+DEFINE_CLK_RPMH_VRM(sm8550, rf_clk2, rf_clk2_ao, "clka2", 1);
+DEFINE_CLK_RPMH_VRM(sm8550, rf_clk3, rf_clk3_ao, "clka3", 1);
+DEFINE_CLK_RPMH_VRM(sm8550, rf_clk4, rf_clk4_ao, "clka4", 1);
+DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk1, ln_bb_clk1_ao, "clka6", 2);
+DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk2, ln_bb_clk2_ao, "clka7", 2);
+DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk3, ln_bb_clk3_ao, "clka8", 2);
+
+static struct clk_hw *sm8550_rpmh_clocks[] = {
+	[RPMH_CXO_PAD_CLK]      = &sm8550_xo_pad.hw,
+	[RPMH_CXO_PAD_CLK_A]    = &sm8550_xo_pad_ao.hw,
+	[RPMH_CXO_CLK]		= &sm8550_bi_tcxo.hw,
+	[RPMH_CXO_CLK_A]	= &sm8550_bi_tcxo_ao.hw,
+	[RPMH_LN_BB_CLK1]	= &sm8550_ln_bb_clk1.hw,
+	[RPMH_LN_BB_CLK1_A]	= &sm8550_ln_bb_clk1_ao.hw,
+	[RPMH_LN_BB_CLK2]	= &sm8550_ln_bb_clk2.hw,
+	[RPMH_LN_BB_CLK2_A]	= &sm8550_ln_bb_clk2_ao.hw,
+	[RPMH_LN_BB_CLK3]	= &sm8550_ln_bb_clk3.hw,
+	[RPMH_LN_BB_CLK3_A]	= &sm8550_ln_bb_clk3_ao.hw,
+	[RPMH_RF_CLK1]		= &sm8550_rf_clk1.hw,
+	[RPMH_RF_CLK1_A]	= &sm8550_rf_clk1_ao.hw,
+	[RPMH_RF_CLK2]		= &sm8550_rf_clk2.hw,
+	[RPMH_RF_CLK2_A]	= &sm8550_rf_clk2_ao.hw,
+	[RPMH_RF_CLK3]		= &sm8550_rf_clk3.hw,
+	[RPMH_RF_CLK3_A]	= &sm8550_rf_clk3_ao.hw,
+	[RPMH_RF_CLK4]		= &sm8550_rf_clk4.hw,
+	[RPMH_RF_CLK4_A]	= &sm8550_rf_clk4_ao.hw,
+	[RPMH_IPA_CLK]		= &sdm845_ipa.hw,
+};
+
+static const struct clk_rpmh_desc clk_rpmh_sm8550 = {
+	.clks = sm8550_rpmh_clocks,
+	.num_clks = ARRAY_SIZE(sm8550_rpmh_clocks),
+};
+
  static struct clk_hw *sc7280_rpmh_clocks[] = {
  	[RPMH_CXO_CLK]      = &sc7280_bi_tcxo.hw,
  	[RPMH_CXO_CLK_A]    = &sc7280_bi_tcxo_ao.hw,
@@ -694,29 +761,31 @@ static int clk_rpmh_probe(struct platform_device *pdev)
name = hw_clks[i]->init->name; - rpmh_clk = to_clk_rpmh(hw_clks[i]);
-		res_addr = cmd_db_read_addr(rpmh_clk->res_name);
-		if (!res_addr) {
-			dev_err(&pdev->dev, "missing RPMh resource address for %s\n",
-				rpmh_clk->res_name);
-			return -ENODEV;
-		}
+		if (hw_clks[i]->init->ops != &clk_fixed_factor_ops) {
+			rpmh_clk = to_clk_rpmh(hw_clks[i]);
+			res_addr = cmd_db_read_addr(rpmh_clk->res_name);
+			if (!res_addr) {
+				dev_err(&pdev->dev, "missing RPMh resource address for %s\n",
+					rpmh_clk->res_name);
+				return -ENODEV;
+			}
- data = cmd_db_read_aux_data(rpmh_clk->res_name, &aux_data_len);
-		if (IS_ERR(data)) {
-			ret = PTR_ERR(data);
-			dev_err(&pdev->dev,
-				"error reading RPMh aux data for %s (%d)\n",
-				rpmh_clk->res_name, ret);
-			return ret;
-		}
+			data = cmd_db_read_aux_data(rpmh_clk->res_name, &aux_data_len);
+			if (IS_ERR(data)) {
+				ret = PTR_ERR(data);
+				dev_err(&pdev->dev,
+					"error reading RPMh aux data for %s (%d)\n",
+					rpmh_clk->res_name, ret);
+				return ret;
+			}
- /* Convert unit from Khz to Hz */
-		if (aux_data_len == sizeof(*data))
-			rpmh_clk->unit = le32_to_cpu(data->unit) * 1000ULL;
+			/* Convert unit from Khz to Hz */
+			if (aux_data_len == sizeof(*data))
+				rpmh_clk->unit = le32_to_cpu(data->unit) * 1000ULL;
- rpmh_clk->res_addr += res_addr;
-		rpmh_clk->dev = &pdev->dev;
+			rpmh_clk->res_addr += res_addr;
+			rpmh_clk->dev = &pdev->dev;
+		}
ret = devm_clk_hw_register(&pdev->dev, hw_clks[i]);
  		if (ret) {
@@ -752,6 +821,7 @@ static const struct of_device_id clk_rpmh_match_table[] = {
  	{ .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250},
  	{ .compatible = "qcom,sm8350-rpmh-clk", .data = &clk_rpmh_sm8350},
  	{ .compatible = "qcom,sm8450-rpmh-clk", .data = &clk_rpmh_sm8450},
+	{ .compatible = "qcom,sm8550-rpmh-clk", .data = &clk_rpmh_sm8550},
  	{ .compatible = "qcom,sc7280-rpmh-clk", .data = &clk_rpmh_sc7280},
  	{ }
  };



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux