Add the I2C Master Hub wrapper and I2C serial engines nodes. Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> --- Depends on: - I2C Master Hub bindings [1] - SM8550 base DT [2] To: Andy Gross <agross@xxxxxxxxxx> To: Bjorn Andersson <andersson@xxxxxxxxxx> To: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> To: Rob Herring <robh+dt@xxxxxxxxxx> To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> Cc: linux-arm-msm@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx [1] https://lore.kernel.org/all/20221114-narmstrong-sm8550-upstream-i2c-master-hub-v1-0-64449106a148@xxxxxxxxxx/ [2] https://lore.kernel.org/all/20221116103146.2556846-1-abel.vesa@xxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/sm8550.dtsi | 181 +++++++++++++++++++++++++++++++++++ 1 file changed, 181 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 07ba709ca35f..e10ec73d66ab 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -985,6 +985,187 @@ spi15: spi@89c000 { }; }; + i2c_master_hub_0: geniqup@9c0000 { + compatible = "qcom,geni-se-i2c-master-hub"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clock-names = "s-ahb"; + clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c_hub_0: i2c@980000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c0_data_clk>; + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_1: i2c@984000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c1_data_clk>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_2: i2c@988000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c2_data_clk>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_3: i2c@98c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c3_data_clk>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_4: i2c@990000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c4_data_clk>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_5: i2c@994000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c5_data_clk>; + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_6: i2c@998000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c6_data_clk>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_7: i2c@99c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c7_data_clk>; + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_8: i2c@9a0000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a0000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c8_data_clk>; + interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_9: i2c@9a4000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a4000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c9_data_clk>; + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + gpi_dma1: dma-controller@a00000 { compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma"; #dma-cells = <3>; --- base-commit: a237afe452d9079aa024e465642b4cde0a04c7ff change-id: 20221115-topic-sm8550-upstream-dts-gpi-qup-ba5e8fdb77a5 Best regards, -- Neil Armstrong <neil.armstrong@xxxxxxxxxx>
