Re: [PATCH 3/3] arm64: dts: qcom: sc8280xp: Add soundcard support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 15/11/2022 18:02, Srinivas Kandagatla wrote:
Add support for SoundCard on X13s. This patch adds support for Headset
Playback, record and 2 DMICs on the Panel along with the regulators
required for powering up the LPASS codecs.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 213 ++++++++++++++++++
  1 file changed, 213 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index b2b744bb8a53..99c3021e8149 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -58,6 +58,16 @@ vreg_misc_3p3: regulator-misc-3p3 {
  		regulator-boot-on;
  		regulator-always-on;
  	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
  };
&apps_rsc {
@@ -67,6 +77,13 @@ pmc8280-1-rpmh-regulators {
vdd-l3-l5-supply = <&vreg_s11b>; + vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
  		vreg_s11b: smps11 {
  			regulator-name = "vreg_s11b";
  			regulator-min-microvolt = <1272000>;
@@ -74,6 +91,13 @@ vreg_s11b: smps11 {
  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  		};
+ vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
  		vreg_l3b: ldo3 {
  			regulator-name = "vreg_l3b";
  			regulator-min-microvolt = <1200000>;
@@ -102,6 +126,7 @@ vreg_l6b: ldo6 {
  	pmc8280c-rpmh-regulators {
  		compatible = "qcom,pm8350c-rpmh-regulators";
  		qcom,pmic-id = "c";
+		vdd-bob-supply = <&vph_pwr>;
vreg_l1c: ldo1 {
  			regulator-name = "vreg_l1c";
@@ -123,6 +148,13 @@ vreg_l13c: ldo13 {
  			regulator-max-microvolt = <3072000>;
  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
  	};
pmc8280-2-rpmh-regulators {
@@ -268,6 +300,80 @@ &remoteproc_nsp0 {
  	status = "okay";
  };
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "SC8280XP-LENOVO-X13S";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC2", "MIC BIAS2",
+		"VA DMIC0", "MIC BIAS1",
+		"VA DMIC1", "MIC BIAS1",
+		"VA DMIC2", "MIC BIAS3",
+		"TX DMIC0", "MIC BIAS1",
+		"TX DMIC1", "MIC BIAS2",
+		"TX DMIC2", "MIC BIAS3",
+		"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+		cpu {
+			sound-dai = <&q6apmbedai  RX_CODEC_DMA_RX_0>;
+		};
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+		platform {
+			sound-dai = <&q6apm>;
+		};
+		};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+		cpu {
+			sound-dai = <&q6apmbedai  TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6apmbedai  TX_CODEC_DMA_TX_3>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
  &usb_0 {
  	status = "okay";
  };
@@ -346,9 +452,96 @@ edp_bl_pwm: edp-bl-pwm-state {
  	};
  };
+&soc {
+	wcd938x: codec {
+		compatible = "qcom,wcd9380-codec";
+		#sound-dai-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+		reset-gpios = <&tlmm 106 0>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+	};
+};
+
+&swr0 {
+	left_spkr: wsa8830-left@0,1 {
+		compatible = "sdw10217020200";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+		reg = <0 1>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+
+	right_spkr: wsa8830-right@0,2{
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_HIGH>;
+		compatible = "sdw10217020200";
You ordered the properties in a different manner in a node right before this one, even though they are almost identical. Please keep them coherent and put compatible&reg at the top.

Konrad
+		reg = <0 2>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+};
+
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5 6>;
+
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_active>, <&dmic02_active>;
+	pinctrl-names = "default";
+	vdd-micb-supply = <&vreg_s10b>;
+	qcom,dmic-sample-rate = <600000>;
+};
+
  &tlmm {
  	gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+ wcd_default: wcd-default-state {
+		reset {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
  	kybd_default: kybd-default-state {
  		disable {
  			pins = "gpio102";
@@ -383,6 +576,26 @@ qup2_i2c5_default: qup2-i2c5-default-state {
  		drive-strength = <16>;
  	};
+ spkr_1_sd_n_active: spkr_1_sd_n_active {
+		perst-n {
+			pins = "gpio178";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spkr_2_sd_n_active: spkr_2_sd_n_active {
+		perst-n {
+			pins = "gpio179";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
  	tpad_default: tpad-default-state {
  		int-n {
  			pins = "gpio182";



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux