Add a device tree for the Xperia 5 IV (pdx224). It's literally the 1 IV
with a smaller body, different panel, one camera lens (not sensor afaict)
swapped out and no 3D iToF sensor, hence the device-specific DT is tiny.
Be sure to follow the vbmeta disablement steps (detailed in pdx223
introduction commit message), otherwise your phone will not boot and
will reject anything and everything with just a non-descriptive
"Your device is corrupted" followed by a sad reboot. This should not
be the case, as vbmeta should be plainly ignored in unlocked state,
but what can we do..
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../qcom/sm8450-sony-xperia-nagara-pdx224.dts | 21 +++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d534888bcfe5..804bbd070fec 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -168,3 +168,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
new file mode 100644
index 000000000000..12c0e6555205
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm8450-sony-xperia-nagara.dtsi"
+
+/ {
+ model = "Sony Xperia 5 IV";
+ compatible = "sony,pdx224", "qcom,sm8450";
+
+ imx563_vdig_vreg: imx563-vdig-vreg {
+ compatible = "regulator-fixed";
+ regulator-name = "imx563_vdig_vreg";
+ gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
--
2.38.1
